Board cnc

BOARD RAMPS 1.5 CHO MÁY IN 3D, CNC Chuẩn cắm Arduino Mega2560 dành cho máy in 3d, máy cnc, las

External wide voltage input,12-24V,and anti-reverse function. Support various versions of MACH3 software and support the latest version. Support windows XP,WIN7,WIN8,WIN10,support for 64-bit systems,support laptops,support for tablet computers. All input signals are separated by light,and emergency stop,knife setting,limit,and zero return can be connected to ensure computer security.The input can be connected to a mechanical switch or a proximity switch (normally open with NPN). All the way through the optocoupler isolated 0-10V analog voltage output,you can control the 0-10V analog voltage input inverter,control the spindle speed. Provide PWM output (5V level),can be connected to the spindle speed controller controlled by PWM. Provide 4 output ports (5V level),can be connected with the optocoupler relay module,control water cooling, spray and so on. Maximum 100KHZ output per axis,can be connected to common anode or common cathode,input level is 5V,stepper or servo motor driver with optocoupler input (pulse + direction). At the same time provide 5-axis interface cable socket (XH2.54),easy to connect. Size:9x6cm/3.54x2.36inch Note: Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Includes: 1x CNC USB MACH3 100Khz Breakout

External wide voltage input,12-24V,and anti-reverse function. Support various versions of MACH3 software and support the latest version. Support windows XP,WIN7,WIN8,WIN10,support for 64-bit systems,support laptops,support for tablet computers. All input signals are separated by light,and emergency stop,knife setting,limit,and zero return can be connected to ensure computer security.The input can be connected to a mechanical switch or a proximity switch (normally open with NPN). All the way through the optocoupler isolated 0-10V analog voltage output,you can control the 0-10V analog voltage input inverter,control the spindle speed. Provide PWM output (5V level),can be connected to the spindle speed controller controlled by PWM. Provide 4 output ports (5V level),can be connected with the optocoupler relay module,control water cooling, spray and so on. Maximum 100KHZ output per axis,can be connected to common anode or common cathode,input level is 5V,stepper or servo motor driver with optocoupler input (pulse + direction). At the same time provide 5-axis interface cable socket (XH2.54),easy to connect. Size:9x6cm/3.54x2.36inch Note: Please allow 1-3mm error due to manual measurement. pls make sure you do not mind before you bid Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package Includes: 1x CNC USB MACH3 100Khz Breakout

GRBL 3-axis CNC Control Board GRBL Engraving Machine Control Panel If you want to see more, please click #kkmoon to enter shop Features: USB interface connected, much convenient than serial port or parallel port. Supporting PWM stepless speed regulation and gray graving. High integration, easy to assemble, good for DIY enthusiast and 3D printer manufactory. Off-line Control: supports gcode, txt, tap, nc, ncc, CNC format processing files. Support Software: grblcontrol/candle(3 axis), lasergrbl(laser). Supports off-line control to operate it without computer.(the off-line controller need to be purchased separately) Specifications: Power: 150W / 300W (Optional) Material: PCB Control System: GRBL Support Software: grblcontrol/candle(3 axis), lasergrbl(laser) Support System: windows XP/7/8/10 Stepping Motor: 42 step motor (1.3A/0.3Nm/24V) Spindle Motor: 775ER(24V/10000rmp/support PWM0%-100%) Laser: 12V5Amax(1W/2.5W/5.5W/7W/10W/15W) Input: 24V(12-24) Off-line Control: support gcode, txt, tap, nc, ncc, cnc Package Size: 14.5 * 8 * 10.5cm / 5.71 * 3.15 * 4.13in 150W: Item Size: 11.5 * 9 * 4 / 4.53 * 3.54 * 1.57in Item Weight: 138g / 4.87oz Package Weight: 188g / 6.63oz 300W: Item Size: 14.5 * 9 * 4 / 5.71 * 3.54 * 1.57in Item Weight: 210g / 7.41oz Package Weight: 260g / 9.17oz Package List: 1 * Control Panel 1 * Shell 4 *

CNC Shield Board: Latest Arduino CNC Shield Version 3.0 GRBL 0.9 compatible 4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13) 2 x End stops for each axis (6 in total) Coolant enable Compatible with A4988 or DRV8825 stepper driver Operating voltage: 5V Digital I/O pins: 14 (including 6 with PWM capability) I-I/O pin output current: 40mA max 3.3V output current: 150mA max Flash memory: 32 kB (0.5kB used by bootloader - included) Static RAM (SRAM): 2 kB EEPROM: 1 kB Clock speed: 16MHz A4988 Stepper Motor Driver Board is a breakout board for Allegro's A4988 DMOS Micro-stepping Driver with Translator and Overcurrent Protection; Low RDS (On) Output Automatic current decay mode detection / selection Mix with slow current decay modes Synchronous rectification for low power dissipation Internal UVLO Crossover-current protection 3.3 and 5 V compatible logic supply Thermal shutdown circuitry Ground fault protection Load short-circuit protection Five selectable step modes: full, 1/2, 1/4, 1/8 and 1/16 Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered is asking for trouble). Color: blue + red Material: metal + PC Package Contents: 1 x CNC Shield Board 1 x UNO R3 Board for Arduino 4 x A4988 Stepper Motor Driver 4 x Heat Sink Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Trong máy in 3D để kết nối giữa điểu khiển động cơ (step drive), đầu nóng đầu phun, cảm biến nhiệt, công tắc hành trình (endstop), bàn nhiện, LCD ... với bộ vi điều khiển arduino mega 2560 thì chúng ta cần một board mạch đó là Ramps 1.5. Board mạch ramp 1.5 ngoài việc kết nối giữa arduino mega 2560 và các thành phần khác thì trên board còn thích hợp cac mosfet, diot nganh ngừa gắn nhầm dây nguồn bảo vệ tat ca linh kiện điện tử Có thể mở rộng để kiểm 3 MOSFET cho đầu phun, quạt, bàn nhiệt Cần nguồn vào 12V từ 20 - 30A Board mạch tích hợp các thành phần bảo vệ mạch Gắn được 5 step driver (X,Y,Z,E0,E1) Có các cổng kết nối I2C, SPI Tất cả MOSFET được kết nối từ chân PWM của arduino Có thể kết nối các server Board mạch nhỏ gọn. LED báo hiệu trạng thái hoạt động của board mạch Đây là boad thông dụng trong việc lắp ráp máy in 3D, phổ biến nhất tại thị trường hiện nay trong và ngoài nước. Công suất MOSFET bàn nhiệt cao hơn phiên bản RAMPS 1.4 cho bàn nhiệt máy in 3d hoạt động ở mức nhiệt độ cao hơn và bền bỉ

Do you want to enjoy high-quality experience? Then get into our store and pick it up.！ Decription: Features: Use removable A4988 or DRV8825 compatible stepping driver. The extension board can be used for engraving machine or 3D printer driver. Compatible with GRBL 0.8. Open-source firmware operated on Arduino UNO, converting G code command into stepping signal. PWM spindle and direction pin, 4 shaft support (X, Y, Z, A - you can copy X, Y, Z or use pin D12 and D13 customize firmware perform complete shaft 4). Compact design, stepping motor can connect 4 pin connectors or be soldered. This is a set of disassembled part, and you need basic soldering skills to solder them together. CNC Expansion Board: Version: V3.0 Green 68 x 53 x 18mm / 2.67 x 2.08 x 0.7" Voltage: DC 12V to 36V (only DRV8825 driver can handle up to 36V, so please consider voltage for power supply) 4pcs A4988 Driver: 20 x 15mm / 0.78 x 0.59" Thermal Shutdown Circuit: Yes Cross Current Protection: Yes Ground Fault Protection: Yes Short Circuit Protection: Yes Compatible Logic Voltage: 3.3V and 5V Five Step Modes: Full, 1/2, 1/4, 1/8 and 1/16 Mix with slow current attenuation model. Internal UVLO and low RDS (on) output. Automatic current attenuation mode Detection/Select. Phase-in rectifier, low power consumption. Warning: Connecting or disconnecting stepping motor while driver is powered on might damage driver. 4pcs Heat Sinks: 8 x 8mm / 0.31 x 0.31" Included: 1 x cnc shield v3 4 x A4988 4 x Hea

GRBL CNC Offline Controller Board 3 Axis Control for 3018 Pro 1610/2418/3018 Engraving Machine Carving Milling Machine Funciton: 1: Manual control: Manually adjust the position of the three axes of XYZ as the starting point of engraving, and manually turn the spindle on or off. 2: Document engraving: After the offline board is saved in the file, it can be connected to the GRBL control board for engraving, no need to connect to the computer. 3: Storage file: The offline version is connected to the computer and recognized as a USB mass storage device, which can directly access the engraving file. 4. Chinese and English dual system, long press Z+ on the main page to switch between Chinese and English. New high-speed 1.8-inch Grbl offline controller Linking Grbl motherboards allows you to engrave files offline. Read 600 files at a time. You can connect a computer USB to transfer files to this controller. Compatible with all versions of Grbl. The baud rate is adjustable. Press Z+for 5 seconds: change the Language to English. Press Z+and Z-:the Z axis will move up and down. Press X+and X-:the X axis will move left and right. Press Y+and Y-:the Y axis will move Front and Back. Press SPIN:Spindle on(on ),Spindle off(off) Press SMOD:return. TF card:TF card reader is to write into the root directory G-code files. color:White material:plastic Size: 10*4*2cm (3.9*1.7*0.8in) Package Contents: 1* 1.8 inch offline controller board 1* TF card 1* connection cable Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/-

mũi phay, máy CNC, dao mắt dứa,khắc, cắt bo mạch. thép mạ titan mũi, dao dùng cho máy khắc, cắt CNC. Mũi có cấu tạo, đầu mũi tương tự như mũi khoan, quanh thân dao có nhiều mắt cắt rất sắc bén, giúp mũi vừa có chức năng khoan, vừa có chức năng cắt. chất liệu, thép hợp kim, được mạ thêm một lớp titan, siêu cứng, giúp tăng độ bền cho dao. Mũi này thường được dùng để cắt, khắc, gia công các loại vật liệu như: nhôm, đồng, gỗ, phíp … Mũi thường được dùng với các loại máy khắc, cắt CNC. Hoặc cũng có thể được dùng với máy mài góc, máy mài mini cầm tay ( những máy có tốc độ cao ) Mũi có 10 kích cỡ : 0.8, 1.0, 1.2, 1.5, 1.6, 1.8, 2.0, 2.4, 3.0, 3.175mm. tùy theo nhu cầu công việc, quý khách lưu ý, chọn đúng loại mình cần. #muiphay #muicnc #catcnc #daomatdua #daoquadua #muikhaccat #catbomanh #board #

TB6560 TB6600 Upgrade 3A 42/57 Stepper Motor Drives CNC Stepper Motor Board This product has been fully tested, and has been applied to the engraving machine, patches and other equipment, quality assurance, ease of use. 1) Working voltage DC 10V-35V. DC24V switching power supply is recommended. 2) the use of high-speed optical coupling 6N137, ensure high speed without losing step. 3) Toshiba TB6560AHQ new original chip, there are low-pressure shut-off, overheating parking and over-current protection circuit to ensure optimum performance. 4) The maximum rated output: ± 3A 5) for 42, 57 3A stepper within two-phase / four-phase / four-wire / six-wire stepper motor is not suitable for more than 3A stepper motor. 6) automatic semi-flow function. 7) Subdivision: full step, half step, step 1/8, 1/16-step, 1/32-step,up to 32 segments. 8) Volume: Width Length 75 * 50 * high 35 (MM) Similar products in features: 1, the current level by adjustable to meet your various application requirements. 2, semi-automatic adjustable flow. 3, using high-speed optical coupling 6N137, ensure high speed without losing step. 4, plate printing setup instructions, can operate without ma

(1) Tấm chắn CNC khắc Phiên bản: 3.0 Màu đỏ Kích thước (L * W * H): 68 x 53 x 18 mm Điện áp: DC 12 ~ 36 V (Hiện tại chỉ có trình điều khiển DRV8825 có thể xử lý tối đa 36V nên vui lòng xem xét điện áp hoạt động khi cấp nguồn cho bo mạch.) Đặc trưng: 1.Sử dụng trình điều khiển bước tương thích A4988 hoặc DRV8825 có thể tháo rời. 2.Bảng mở rộng có thể được sử dụng cho máy khắc, bảng mở rộng trình điều khiển máy in 3 d 3.GRBL 0.8 tương thích. (Phần mềm nguồn mở chạy trên một cho UNO biến các lệnh mã G thành tín hiệu bước) 4.PWM Spindle và chân hướng, hỗ trợ 4 trục (X, Y, Z, A-Có thể sao chép X, Y, Z hoặc tạo một trục thứ 4 đầy đủ với phần sụn tùy chỉnh bằng cách sử dụng chân D12 và D13) 5. thiết kế nhỏ gọn. Động cơ bước có thể được kết nối với đầu nối molex 4 chân hoặc hàn tại chỗ. 6.Xin lưu ý rằng đây là một bộ chưa lắp ráp và cần có các kỹ năng hàn cơ bản. (2) Trình điều khiển động cơ bước A4988 Màu đỏ Kích thước (L * W * H): 20 x 15 x 10 mm Mạch ngắt nhiệt: Có Bảo vệ chéo dòng: Có Bảo vệ sự cố nối đất: Có Bảo vệ ngắn mạch tải: Có Nguồn cung cấp logic tương thích: 3,3V và 5 V Năm chế độ bước có thể lựa chọn: đầy đủ, 1/2, 1/4, 1/8 và 1/16 Đặc trưng: 1.Mix với các chế độ phân rã hiện tại chậm. 2.Internal UVLO và Ngõ ra RDS (Bật) thấp. 3. phát hiện / lựa chọn chế độ phân rã dòng điện tự động. 4. chỉnh lưu đồng bộ để tiêu tán công suất thấp. 5. Cảnh báo: Kết nối hoặc ngắt kết nối động cơ bước trong khi trình điều khiển được cấp điện có thể phá hủy trình điều khiển. (3) cho Ban ar-du-ino R3 MCU: ATmega328 Tốc độ đồng hồ: 16 MHz Giao diện USB: ATmega16U2 Điện áp hoạt động: 5 V Dòng đầu ra chân I-I / O: tối đa 40 mA Dòng đầu ra 3,3 V: tối đa 150 mA Chân I / O kỹ thuật số: 14 (bao gồm 6 chân với khả năng PWM) Chân đầu vào tương tự: 6 EEPROM: 1 kB RAM tĩnh (SRAM): 2 kB Bộ nhớ flash: 32 kB Kích thước (L * W * H): 68 x 53 x 10 mm gói bao gồm: 1 x Bảng UNO R3 1 x Tấm chắn CNC khắc 4 x Trình điều khiển động cơ bước A4988 1 x Kim hàng 40 chân 1 x cáp Ghi chú: Đo thủ công, xin vui lòng cho phép lỗi 1 ~ 3 cm, cảm ơn

Aibecy 3D Printer Accessories CNC Shield UNO-R3 Board A4988 Driver Kit With Heat Sink For Arduino Engraver 3D Printer Features: CNC shield uses removable A4988 or DRV8825 compatible stepper drivers; the CNC shield extension board can be used for carving machine, 3D printer driver expansion board. GRBL 0.8 compatible. (Open source firmware that runs on an Arduino-UNO that turns G-code commands into stepper signals); PWM Spindle and direction pins,4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13). Small size and compact design, Stepper Motors can be connected with 4 pin molex connectors or soldered in place. A4988 Stepper Motor Driver mixes with slow current decay modes; internal UVLO and low RDS (on) output. Automatic current decay mode detection/selection; synchronous rectification for low power dissipation. Specifications: CNC Shield Board -- Version: 3.0 Color: red Size: 6.8 * 5.3 * 1.8cm / 2.68 * 2.09 * 0.71in VoltageL DC 12-36V (at the moment only the DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.) A4988 Stepper Motor Driver -- Color: red Size: 2 * 1.5 * 1cm / 0.79 * 0.59 * 0.39in Thermal Shutdown Circuitry: yes Crossover Fault Protection: yes Load Short-Circuit Protection: yes Compatible Logic Suppluy: 3.3V and 5V Five Selection Step Modes:full, 1/2, 1/4, 1/8, 1/16 UNO R3 -- Color: blue Size: 6.8 * 5.3cm / 2.68 * 2.09in Package Size: 15 * 11 * 4cm / 5.9 * 4.33 * 1.57in Package Weight: 90g / 3.17oz Note: This is an unassembled kit and Basic soldering skills are needed. Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. Package List: 1 * UNO-R3 Board 1 * CNC Shield Board 4 * A4988 Stepper Motor Driver 4 * Heat Sink 1 * USB Cable 1 * 40-Pin Row Needles #cncshieldboard #3dprinteraccessorie #ConsumerElectronics #3dprinterkitreprap #a4988drv8825 #controller #Printers #unor3board #steppermotordriver #3dpr

Feature: 1. Suitable for Nema 17, Nema 23, Nema34 stepper motor，and 2‑phase mixing stepper motors(outer diameter: 42, 57, 86mm) 2. This high subdivision driver is suitable for high subdivision motor. Suitable for 42,57,86 type 2‑phase 4‑phase (4‑wire, 6‑wire, 8‑wire) stepper motor 3. PWM current control guarantee the stable operation of motor, suitable for engraving machine, CNC, etc. 4. The product is made of high class materials of good quality, which possess stable working performance 5. The stepper motor driver have stable structure and high working efficiency, you can use with confidence Specification: Item Type: Microstep driver Model: DM542 Color: Black Power Supply: DC 24-50V (36V recommended) Maximum Current: 4.2A Output Phase Current: 1.0A-4.2A Logic Input Current: 8-20mA (10mA recommended) Step Pulse Response Frequency: 0-200KHz Operating Temperature: 0℃ to +50℃ Package List: 1 x Microstep Dri

Welcome to felicedollhouse shop,😘I hope you can add it to your favorite store listing! [Felice] 10PCS PCB CNC Print Circuit Board Carbide Micro Drill Bits Set Tool 0.1mm-1.0mmMaterial: Hard alloy (tungsten steel) Size: 0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm Shank diameter: approx. 1/8" (3.175mm) Color:random Package included:1set x 10pcs d

Feature: 1. The board can be position adjustment and program call without starting the computer client 2. Equipped with 128M memory card, which can provide stable performance 3. Exquisite and compact, easy to operate 4. Adopted of high quality electronic components, and accuracy process, ensure for the durability 5. The offline board is suitable for CNC engraving machine Specification: Item Type: Offline Control Board Use: Can adjust the position and call the program Package List: 1 x Offline Bo

Features:   Support for 4-axis linkage, you can connect four stepper motor drives or servo drives;  Maximum step-pulse frequency is 100KHz, which is suitable for the servo or stepping motor;  Support automatic probe tool  Support Emergency input  Support for limit switch  Support for connecting electronic handwheel  Need use external 24V DC power supply to isolate USB and external port, and to make the system more stable.  Have 0-10V output port, you can use mach3 software to control the spindle motor speed.  4 general-purpose inputs, you can connect the limit switch, estop switch, probe switch, back to zero and other device  4 general-purpose isolated relay drive output interface, can drive four relays for controlling the spindle starts, forward rotating and reverse rotating, pumps and other device;  1 status LED, indicate connection status on the board.    Specification: Product name: MACH3 motion control card Support Axis:4 Support drive type: stepper/servo driver Maximum step-pulse frequency:100KHz Weight: Approx.128g/4.5oz   Package List: 1 x Mach3 Motion Card 1 x ca

CNC Shield Board: Latest CNC Shield Version 3.0 for Arduino.GRBL 0.9 compatible. (Open source firmware that runs on an UNO for Arduino that turns G-code commands into stepper signals).PWM Spindle and direction pins.4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13).2 x End stops for each axis (6 in total) Coolant enable,Uses removable A4988 or DRV8825 compatible stepper drivers Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping ).Compact design.Stepper Motors can be connected with 4 pin molex connectors or soldered in place. Runs on 12-36V DC. (At the moment only the DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.),Please note that this is an unassembled kit and Basic soldering skills are needed.A4988 Stepper Motor Driver Board is a breakout board for Allegro's A4988 DMOS Micro-stepping Driver with Translator and Overcurrent Protection; please read the A4988 datasheet carefully before using this product. Low RDS (On) Output,Automatic current decay mode detection / selection,Mix with slow current decay modes.Synchronous rectification for low power dissipation,Internal UVLO.Crossover-current protection,3.3 and 5 V compatible logic supply,Thermal shutdown circuitry,Ground fault protection,Load short-circuit protection,Five selectable step modes: full, 1/2, 1/4, 1/8 and 1/16. Colour: Photo Color Material: PC+ metal Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it is powered is asking for trouble). Note: Green or Red PCB Package Includes: 1 x CNC Shield Board 4 x A4988 Stepper Motor Driver 4 x Heat Sink Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from thereal thing. The measurement allowed error is +/- 1

Aibecy 3D Printer Accessories CNC Shield R3 Board A4988 Driver Kit With Heat Sink For Engraver 3D Printer Features: CNC shield uses removable A4988 or DRV8825 compatible stepper drivers; the CNC shield extension board can be used for carving machine, 3D printer driver expansion board. GRBL 0.8 compatible. (Open source firmware that runs on an board that turns G-code commands into stepper signals); PWM Spindle and direction pins,4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13). Small size and compact design, Stepper Motors can be connected with 4 pin molex connectors or soldered in place. A4988 Stepper Motor Driver mixes with slow current decay modes; internal UVLO and low RDS (on) output. Automatic current decay mode detection/selection; synchronous rectification for low power dissipation. Specifications: CNC Shield Board -- Version: 3.0 Color: red Size: 6.8 * 5.3 * 1.8cm / 2.68 * 2.09 * 0.71in VoltageL DC 12-36V (at the moment only the DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.) A4988 Stepper Motor Driver -- Color: red Size: 2 * 1.5 * 1cm / 0.79 * 0.59 * 0.39in Thermal Shutdown Circuitry: yes Crossover Fault Protection: yes Load Short-Circuit Protection: yes Compatible Logic Suppluy: 3.3V and 5V Five Selection Step Modes:full, 1/2, 1/4, 1/8, 1/16 UNO R3 -- Color: blue Size: 6.8 * 5.3cm / 2.68 * 2.09in Package Size: 15 * 11 * 4cm / 5.9 * 4.33 * 1.57in Package Weight: 90g / 3.17oz Note: This is an unassembled kit and Basic soldering skills are needed. Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. Package List: 1 * R3 Board 1 * CNC Shield Board 4 * A4988 Stepper Motor Driver 4 * Heat Sink 1 * USB Cable 1 * 40-Pin Row Ne

----------------------- ♥♥ -Produkasyong Impormasyon - ♥♥ ------------------ ------- ✔Magpadala upang magpadala ng ✔High kalidad ✔Binungunang presyo ✔Brand bagong 100% ✔ Pinakamahusay na Presyo ng Dami ng Shopee ✔upplier Info ✔invoice Mga sorpresa para sa iyo: ❀ Sundin ang mga shop / "Tulad ng" Item: Priority Shipping & Free Gift ☞PS: Kung nais mo ng isang libreng regalo, mangyaring ipadala sa akin ang screen na sinusundan mo ang aking shop at mag-iwan ng mensahe sa iyong order. # Xiyijiaproduct Features: 1. Using high quality materials and fine grinding process makes the cutting edge more sharp. 2. Drill bit has a large scraps discharge space, little resistance and smooth. 3. Reduce cutting force and broken drill to improve the quality of hole wall. 4. Easy to change out and do a great job cutting through the PCB for solder holes. 5. Come with a great storage container, easy to find and grab the drill bit you need.   Specifications: Material: Tungsten Carbide Quantity: 10pcs Storage Box Dimensions: 88*51*10mm/3.46*2.01*0.39in Cutting Edge Diameter: 0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0mm Weight: Approx. 41g   Package Includes: 10 x Drill Bits 1 x Storage Box   Note: Due to the difference between the monitors and light effect, the picture may not reflect  the actual color of the item. Thank you for your understandi

Welcome to fstyzx.vn! Material: Hard alloy (tungsten steel) Size: 0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm Shank diameter: approx. 1/8" (3.175mm) Color:random Package included:1set x 10pcs d

Tính năng: Điều khiển tối đa 5 trục Thích hợp phần mềm điều khiển qua cổng LPT như Mach3, LinuxCNC, KCAM Các đầu vào được bảo vệ bởi opto Hỗ trợ 5 đầu vào: có thể sử dụng Emergence-Stop (dừng khẩn cấp), Limit (cữ), …. Có 1 Rơle điều khiển đầu ra, có thể điều khiển trục chính,bơm nước,quạt hút …. Đầu ra 0-10V hỗ trợ biến tần điều khiển trục chính Thích hợp với các động cơ 2 pha. Thông số: Nguồn cấp: cổng USB từ máy tính PC hoặc nguồn ngoài 12-24V Điều khiển động cơ: Xung và hướng Thích hợp bộ điều khiển: 2 pha như M542, M542H, MA860H, 2MA2278, 2M542, 2M860 ….. Khối lượng: khoảng 75g Kích thước: 90 * 70 * 20mm (L*W*H) Sản phẩm kèm cáp

Welcome to factoryoutlet.vn! Description: Fully support control via parallel port, such as MACH3,etc. USB power supply and external power supply are seperate for safety. External power supply input: 12-24V. Equiped with anti-reverse connection function. All input signal will be isolated by optical coupler for further connection with emergency Stop,tool setter, limit, ect for PC safety. One relay output port for control spindle on/off. The output interface. is P17. One 0-10V analog voltage output port for control of inverter that has relative analog interface, And for control of spinle speed. The output interface is P1. If all 17 interfaces are activated, drivers equipped with optical coupler can be controled and 5 axis stepper motor can be controled. As PWM output, P1 can control spindle speed regulator that is equipped with optical coupler. Connection with 5V input drivers that has common cathode or anode is supported. Specifications: Dimension:Approx. 90 x 70 x 18mm Cable length:Approx.130 cm Color:Green Package Included: 1PC*MACH3 Interface Board 1PC*USB Cable WISH YOU HAVE A GOOD

___________________❀Alwaysonline❀___________________ Welcome to our store, we insist on the lowest price to sell the best quality items. ✔Ready Stock ✔Wholesale Price ✔Quality Checked ★Surprises for you★ ☞Shop Voucher: Get More Discount ☞Follow Shop: Free Gifts ☞“Like” Items: Priority Shipping ( Sent us follow shop screenshot and remark on your order "Free Gift", if not will miss) ★★Attention Please★★ ✌We will be based on your guests in your country to send the corresponding adapter plug. _______________❀Product Information❀______________ Features: 1. High quality aluminum plate with multiple screw holes and grooves to ensure easy assembly. 2. These end mounts are used for C-beam linear actuators and many other great applications. 3. Pre-installed mounting holes, built-in screw holes ensure embedded mounts. 4. High quality material, anti-friction and high temperature resistance. 5. Hierarchical performance improvement, healthy 3D printing. 6. Installation is simple but stable, 100% brand new. Specification: Material: Anodized Aluminum Colour: Black Thickness: 5 mm Size: approx. 12.5 * 12.5 * 0.5cm / 4.9 * 4.9 * 0.2in Package List: 1 * Build Plate Note: Các sản phẩm có chất liệu vàng, kim cương, đá quý trong shop đều là xi mạ/ nhân

We have many products in our warehouse, our warehouse is in Shenzhen . Genaral it need 1-2weeks arrive your hand. if you subimit order , we will handle in 1-3days.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

100% brand new and high quality Made from high-quality aluminum material, the Positioning Board has better handfeel and are durable to use. Set your 60% keyboard apart with these Mechanical Keyboard plates. At 1.5 millimeters thick, they’re compatible with most keyboard layouts. This new plate is upgraded which can support all GK64 DZ60 GH60 layout and can support ANSI ISO and CNC as well.It uses PCB-Mounted stabilizers.This new plate support GK64 PCB。Original GK64 plastic case can't use it. Material: Anodized aluminum Thickness: 1.5 mm Spacebar: 2U OR 2.25U(optional) Size :18.5x9.4cm/7.28x3.70inch Color: Silver Package includes: (Without retail package) 1 x Positioning

MACH3 engraving machine interface board 5 axis stepper motor driver cnc interface board with optocoupler isolation Buy more than3 package, will enjoy discount of 5% Buy the more quantity, the price will be cheaper buy more parts. used the "Add to cart" 01 If you can't find the product you want in my store, Please cantact me. 5 Axis CNC Breakout Board For Stepper Driver Controller mach3 Ardu brand Features: 1, full support for MACH3 and other support parallel port control computer software. 2, USB power supply and peripheral phase separation to protect computer security. 3, the external wide voltage input, 12-24V, with anti-reverse function. 4, all input signals all via the optical coupling isolation, can be accessed by emergency stop, the knife, spacing, etc., to protect computer security. 5, one relay output port, can control the spindle switch. Output port for the P17 port. 6, all the way through optocoupler isolated 0-10V analog voltage output, it can control the drive with the corresponding analog interface, to control the spindle speed. Output port to port P1. 7, open to all 17 ports, which can be accessed with the drive optocoupler can be controlled 5-axis stepper motor. 8, P1 PWM output can be controlled with optocoupler input spindle governor. 9, can be accessed by common cathode or common anode input level for the drive t

___________________❀Alwaysonline❀___________________ Welcome to our store, we insist on the lowest price to sell the best quality items. ✔Ready Stock ✔Wholesale Price ✔Quality Checked ★Surprises for you★ ☞Shop Voucher: Get More Discount ☞Follow Shop: Free Gifts ☞“Like” Items: Priority Shipping ( Sent us follow shop screenshot and remark on your order "Free Gift", if not will miss) ★★Attention Please★★ ✌We will be based on your guests in your country to send the corresponding adapter plug. _______________❀Product Information❀______________ Features: CNC V3 Board: Detachable A4988 compatible stepper drive. The expansion board can be used for the engraving machine and the 3 d printer driver expansion board. GRBL 0.8 compatible. Open source firmware running for Arduino UNO, converting G code commands to step signals. PWM spindle and direction pins, 4-axis support (X, Y, Z, A- can copy X, Y, Z or make a complete 4th axis, using custom firmware, using pins D12 and D13). Compact design. The stepper motor can be connected or soldered into place with a 4-pin molex connector. Please note that this is an unassembled kit that requires basic welding skills. A4988 Stepper Motor Driver: A mixer with a slow current decay mode. Internal UVLO and low RDS (on) output. Automatic current decay mode detection/selection. Synchronous rectification, low power consumption. Warning: Connecting or disconnecting the stepper motor while the drive is powered may damage the drive. Specifications: CNC V3 Board: Color: Red Voltage: DC 12~36 V (At this time, only the DRV8825 driver can handle voltages up to 36V, so please consider the operating voltage when powering the board.) A4988 Stepper Motor Driver: Color: Red Thermal shutdown circuit: yes Cross current protection: yes Ground fault protection: yes Load short circuit protection: yes Compatible logic supplies: 3.3V and 5 V UNO R3 Board: Single chip microcomputer: ATmega328 Clock speed: 16 MHz USB interface: ATmega16U2 Operating voltage: 5 V I-I / O pin output current: up to 40 mA 3.3 V output current: up to 150 mA Digital I/O pins: 14 (including 6 PWM-capable pins) Analog input pin: 6 EEPROM: 1 kB Static RAM (SRAM): 2 kB Flash: 32 kB Package List: 1 * UNO R3 Board 1 * CNC Shield V3 Expansion Board 4 * A4988 Stepper Motor Driver 1 * 40-way Pin 1 * USB Ca

Features: Suitable for 2-phase 4-wire stepper motor (2A), laser module in 10W (12V, 5V), support 48V 400W spindle (using on-board relay). Made of premium material, high quality and durable for long time service. Compact body but it has stable performance. It connects by USB, 12V power supply. Use for DIY laser engraving machine, drawer machine and CNC engraving machine, etc. Interesting to install and use, perfect gift for DIY amateurs and enthusiasts. Specifications: Material: FR-4 Main color: Multi-color Communication port: Micro USB Supported motor: 42 stepper motor within 2A 2-phase 4-wire Supported software: Support VIGOTEC software，supporting GRBL( Candle, EleksCam T2-Laser, Benbox, GrblController, LiteFire and Laser GRBL, etc.) Main purpose: For DIY laser engraver Power supply: DC 12V 5.5-2.1 Support axis: XY axis USB cable length: 1.5m / 59.06in Item size: 10 * 4.5 * 1.5mm / 3.94 * 1.77 * 0.59in Item weight: 165g / 5.82oz Package size: 15.5 * 15.5 * 5cm / 6.10 * 6.10 * 1.97in Package weight: 210g / 7.41oz Package List: 1 * Control board 1 * USB cable 1 * USB-shaped encryption lock 2 * Acrylic board 1 * Bag of screws and nuts #engraving #engravingmodule #lasercutterengraver #carvingaccessory #engravemachine #engravinglasermodule #laserengravermachine #engravingaccessorie #lasermodule #engraveracce

Mã sản phẩm: LK0213 Mạch CNC BOB MACH3 LPT dùng để nhận dữ liệu từ cổng giao tiếp song song LPT của máy tính để nhận lệnh và điều khiển các cơ cấu chấp hành khác như đọc dữ liệu từ cảm biến, xuất xung điều khiển động cơ, kích relay bơm nước,… Mạch CNC BOB MACH3 LPT được thiết kế có thể điều khiển được 5 trục X, Y, Z, A, B và một ngõ ra kích relay, 5 ngõ đọc cảm biến đầu vào và cổng xuất xung điều khiển spindle (đầu gia công). Mạch dùng cổng usb để cấp nguồn trực tiếp, Tất cả các cổng điều khiển đầu ra đều được cách ly opto và đều được qua mạch đệm cho tín hiệu được ổn định nhất. Thông số kỹ thuật : - Nguồn : 12~24VDC. - Hỗ trợ điều khiển : 5 trục X, Y, Z, A, B - Hỗ trợ 1 cổng xuất xung PWM điều khiển Spindle. - 1 ngõ ra Relay ( loại 220V 10A) : có jump để chọn ngõ ra thường đóng /thường mở. - 5 Ngõ vào : có thể kết nối với công tắc hành trình hoặc các loại các biến... - Tất cả các ngõ ra đều được cách li bởi opto và IC đệm để đảm bảo sự ổn định của tín

5 trục CNC Breakout Shield Board Trình điều khiển động cơ bước Bộ điều khiển mô-đun MACH3 Features: 1.Fully support MACH3 and other computer software that support parallel port control. 2.USB power supply and peripherals powered phase separation to protect computer security. 3.Peripheral wide voltage input, 12-24V, and anti-reverse function. 4.All input signal are optocoupler isolated, which can urgently stop, limit, to protect computer security. 5.All the way to the relay output port,spindle switch controllable. Output port is P17. Descriptions: 1.All the way through the optocoupler isolated 0-10V analog voltage output can be controlled with the corresponding analog interface converter to control the spindle speed. Output port is P1. 2.Open all 17 ports, which can be accessed with the optocoupler drive, 5-axis stepper motor can be controlled. 3.P1 as PWM outputs can be controlled with optocoupler input spindle governor. Can be accessed by a common cathode or common anode input level to 5V drive. Specifications: Color:blue Model:MACH3 Peripheral voltage input:12-24V Package Information: Package size:98 x 70 x 25mm/3.86 x 2.76 x 0.98in Package Weight:45g/1.59oz Poly Bag Package Package Included: 1 x 5 axis CNC Breakout Board 1 x USB C