Màn hình tft arduino

100% brand new and high quality Features: This is a 3.0 inch TFT LCD expansion board. This display has a controller built into it with RAM buffer, so that almost all work is done by the TFT. It leads out the pins of the TFT and breakout pins pitch is 2.54mm, so the secondary development is easy. With GPRS module, you can design your phone. With NFC reader module, you can create access control systems with the photos show. With voltage and current sensor, you can make oscilloscope. Can use it directly to display characters, graphics and BMP format images with the help of Micro SD card adapter module. Compatibility: Because the logic level is 3.3V, it is compatible with 3.3V Arduino board, you generally need to add a level conversion circuit if you use a 5V Arduino Board (Arduino UNO R3 / Arduino Mega2560 / Arduino Leonardo). LED pin can connect to external backlight control circuit to control the brightness of backlight. You can connect it to GND to turn on the backlight all day. Very suitable for digital photo frame, oscilloscope, function generator, detection system monitor. Specification: Touch screen type: resistive touchscreen Resolution: 400 x 240, 16-bit (262,000) color Operating voltage: 3.3V Logic level: 3.3V Operating current: the maximum is 150mA Bus interface: 8080-parallel interface (8 bit) Dimensions: 4.8x8.8cm/1.89x3.46inch Display size: 3.0inch Touch Pen length: 9cm Quantity: 1 Set Package includes: 1 x 3.0" TFT LCD Touch Screen Board 1 x Touc

Description: 100% brand new and high quality Material: Electrical components Color: See pictures This is a 3.2 inch TFT touch screen expansion board using standard Arduino Shield interface and it has good compatibility. It integrates a 3.2-inch touch screen, I2C temperature sensor, TF card holder, level conversion circuit, and the secondary development is easy. With GPRS module, you can design your Arduino phone. With NFC reader module, you can create access control systems with the photos show. With voltage and current sensor, you can make oscilloscope. Can use it directly to display characters, graphics and BMP format images. And touch controlling is available; Compatibility: As the SD card is connected to SPI pins of ICSP interface, compatible with Arduino UNO R3 / Arduino Mega2560 / Arduino Leonardo Touch screen type: resistive touchscreen. Touch Pen: length is 9cm; Resolution: 240X400; Display size: 3.2 inch; Operating voltage: 5V; Logic level: 5V / 3.3V; On-board 3.3V / 300mA regulator circuit; Operating current: the maximum is 150mA Use the A0 ~ A3 pins, D4 ~ D13 pins. And I2C interface, D0 / D1 / D2 / D3 is available, please refer to the product schematics for the details. Onboard Micro SD slot, support Micro SD / TF Card; Onboard LM75 temperature sensor: default I2C address is 0X48, scale is -55 ~ 125'C Very suitable for digital photo frame, oscilloscope, function generator, detection system monitor Size: 9*5.3cm/3.54"*2.09" Download ip:http://www.winddeal.net/image2/tools/1A0847.rar Note: Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: 1 x Shield 1 x Touc

The shield is fully assembled, tested and ready to go. No wiring, no soldering! Simply plug it in and load up our library - you'll have it running in under 10 minutes! Works best with any classic (UNO/Duemilanove/Diecimila). This shield does NOT work with the Mega but its going to be half the speed of the Uno-type boards because of the way the Mega rearranges all the pins (there is no way to get around this!) This shield is not Leonardo-compatible Description: Spice up your project with a beautiful large touchscreen display shield with built in microSD card connection. This TFT display is big (2.4 inch diagonal) bright (4 white-LED backlight) and colorful (18-bit 262,000 different shades)! 240x320 pixels with individual pixel control. It has way more resolution than a black and white 128x64 display. As a bonus, this display has a resistive touchscreen attached to it already, so you can detect finger presses anywhere on the screen. color: red Material: comprehensive material Technical Details: 2.4 inch diagonal LCD TFT display 240x320 resolution, 18-bit (262,000) color spfd5408 controller with built in video RAM buffer 8 bit digital interface, plus 4 control lines Uses digital pins 5-13 and analog 0-3. That means you can use digital pins 2, 3 and analog 4 and 5. Pin 12 is available if not using the microSD Works with any '328 or Mega (Leonardo not supported yet) 5V compatible! Use with 3.3V or 5V logic Onboard 3.3V 300mA LDO regulator 4 white LED backlight. On by default but you can connect the transistor to a digital pin for backlight control 4-wire resistive Press screen Package Contents: 1* 2.4 inch TFT LCD screen 1* Press PenOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

100% brand new and high quality This is a 2.0 inch TFT LCD expansion board. This display has a controller built into it with RAM buffering, so that almost no work is done by the microcontroller.It leads out the pins of the TFT and breakout pins pitch is 2.54mm, so the secondary development is less difficult. With GPRS module, you can design your Arduino phone. With NFC reader module, you can create access control systems with the photos show. With voltage and current sensor, you can make oscilloscope. Can use it directly to display characters, graphics and BMP format images. Compatibility: Because the logic level is 3.3V, it is compatible with 3.3V Arduino board, you generally need to add a level conversion circuit if you use a 5V Arduino Board (Arduino UNO R3 / Arduino Mega2560 / Arduino Leonardo) Specifications: Material: Electrical components Arduino library: UTFT Driver IC: ILI9225，ILI9220，S6D1121，ST7775，ST7735, S6D1121 Touch screen type: resistive touchscreen Touch Pen: length is 9cm Resolution: 176x220, 16-bit (262,000) color Display size: 2.0 inch Operating voltage: 3.3V Logic level: 3.3V Operating current: the maximum is 150mA LED pin can connect to external backlight control circuit to control the brightness of backlight. You can connect it to GND to turn on the backlight all day Very suitable for digital photo frame, oscilloscope, function generator, detection system monitor Download ip:http://www.winddeal.net/image2/tools/1A0850.rar Quantity: 1Pc Note: Pictures are for reference only, driver IC are random delivery, please refer to the product you received Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: 1 x Module 1 x Touc

100% brand new and high quality Features: This is a 3.0 inch TFT LCD expansion board. This display has a controller built into it with RAM buffer, so that almost all work is done by the TFT. It leads out the pins of the TFT and breakout pins pitch is 2.54mm, so the secondary development is easy. With GPRS module, you can design your phone. With NFC reader module, you can create access control systems with the photos show. With voltage and current sensor, you can make oscilloscope. Can use it directly to display characters, graphics and BMP format images with the help of Micro SD card adapter module. Compatibility: Because the logic level is 3.3V, it is compatible with 3.3V Arduino board, you generally need to add a level conversion circuit if you use a 5V Arduino Board (Arduino R3 / Arduino Mega2560 / Arduino Leonardo). LED pin can connect to external backlight control circuit to control the brightness of backlight. You can connect it to GND to turn on the backlight all day. Very suitable for digital photo frame, oscilloscope, function generator, detection system monitor. Specification: Touch screen type: resistive touchscreen Resolution: 400 x 240, 16-bit (262,000) color Operating voltage: 3.3V Logic level: 3.3V Operating current: the maximum is 150mA Bus interface: 8080-parallel interface (8 bit) Dimensions: 4.8x8.8cm/1.89x3.46inch Display size: 3.0inch Touch Pen length: 9cm Quantity: 1 Set Package includes: 1 x 3.0" TFT LCD Touch Screen Board 1 x Touc

Description: Support Arduino UNO and Arduino Mega2560 and other development board DIP. Touch: No Without any wiring, all open source, Arduino libraries offer The backlight always on, can not control the backlight, backlight is connect to 3.3V DC: 5V 3.5inch TFT LCD Module, Resolution 480x320 Designed with a TF card socket on the back of board so that you can conveniently insert a card. It is used to repair faulty screen: display problems, dead pixels, cracked LCD screens, wrong color issues. Highly recommend professional installation. Note: The control and driving circuit of TFT modules is low voltage and FRIDA micro-power CMOS circuit, can be easily damaged by static, static damage is an irreparable damage, and sometimes human have hundreds of volts of high voltage static electricity Specification: Size: 3.5" Screen material: TFT Resolution: 320X480 Drive IC:ILI9481 Interface mode: parallel 8 bit Module pin: 8+8+6+6 Module size: Approx. 80x50x10mm Package Includes: 1 Piece 3.5 inch TFT LCD Screen S

Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày ______________ ♤ Chào mừng cửa hàng Superparis ♤ _______________ ✔Hàng có sẵn !! Hãy mua ngay! ✔ Chất lượng được kiểm chứng ✔ Giá tốt nhất ✌ (Lưu ý: Chúng tôi sẽ dựa trên quốc gia của bạn để gửi phích cắm bộ chuyển đổi tương ứng) ➷ Các nhà bán lẻ, bán sỉ luôn được hoan nghênh hợp tác với chúng tôi lâu dài! __________________ ❀Thông tin sản phẩm❀ __________________ Đặc trưng: 1. Màn hình LCD 3,5 inch 480x320 TFT, hiển thị hình ảnh chất lượng cao và góc nhìn rộng. 2. Được trang bị ổ cắm thẻ SD và SPI Mạch FLASH. 3. Hỗ trợ cấp 12 mẫu dành cho Arduino và 3 Chẳng hạn như model STM32. 4. Dành cho bo mạch lập trình Arduino UNO & MEGA 2560. 5. Tương thích với UTFT / UTFT_Buttons / Utouch Library. Mô tả sản phẩm: Tùy chọn: Với bảng điều khiển bằng cảm ứng, không cảm ứng Điện áp đầu vào: DC 2,8 ~ 3,3V IC Drive: ILI9486 / ILI9488L Kích thước màn hình: 3.5in Chất liệu màn hình: TFT Độ phân giải: 320x480 Loại mô-đun pin: 28 pin (8 + 8 + 6 + 6) Chiều dài bút cảm ứng: 8,8cm / 3,46in Kích thước mô-đun: 8.5 * 5.5cm / 2.17 * 3.35in Khối lượng: Khoảng 55g / 1.9oz Gói hàng bao gồm: 1 * Màn hình LCD với Bảng điều khiển cảm ứng 1 * Bút cảm ứng hoặc là 1 * Màn hình LCD không có bảng điều khiển cảm ứng (Tùy bạn chọn) Lưu ý 1. Do chênh lệch cài đặt ánh sáng và màn hình, màu sắc sản phẩm có thể hơi khác so với hình ảnh. 2. Do đo lường thủ công, mong bạn vui lòng cho phép sai số nhỏ. Cảm ơn bạn nhiều. #DisplayModule #LCDDisplay #LCDModule #TFTLCDDisplay #TFTLCDM

Reminder: Driver IC: ILI9341 New 2.8-inch high-definition LCD screen module with touch Interface definition: (fully compatible with the full range of development boards of Punctual Atom, direct plug-in use) default 16-bit parallel bus New 2.8 inch TFT touch screen module This module is a general-purpose TFTLCD module, using a brand-new LCD module plus the original factory touch screen, no copycat icons, and super quality. This module has the following characteristics: 1. The resolution of 320×240. 2. 16-bit color (65,000 colors) display support. 3. Adopt high-brightness backlight, good backlight brightness and low power consumption. 4. Adopt high-quality touch, high sensitivity and high linearity. 5. Use customized yellow copper gold-plated pin header, beautiful and durable. 6. Universal interface, can be used for all series of ALIENTEK development boards. Note: There is no fake icon on this touch screen! Detailed parameters of 2.8 inch LCD module: 1. LCD size: 2.8 inches 2. Display area: 57.6mm*47.2mm 3. Driver IC: ILI9341 4. Resolution: 320*240 (RGB) 5. Color depth: 16 bits (65K colors) 6. Working voltage: 3.3V or 5V 7. Backlight voltage: 3.3V 8. Touch screen type: resistive, glass touch screen 9. Interface mode: 16-bit (default)/8-bit configurable 10. Module size: 51mm*8

❄ Welcome To Chitengyesuper ❄ SPI serial, less I/O port need Controller: ST7735S Pcb adapter for lcd One sd card socket Can be driverd by 8051 / AVR / PIC /ARM/STM32 .... Resolution: QVGA 128*160 Dots Package included: 1 x 1.8 inch 1.8" TFT LCD Display module ST7735S 128x160 51/AVR/STM32/ARM 8/16

Hello everyone, our company is in Shenzhen。we specialize in selling electronic components. When we receive your order, we will process your order within 24 hours. If you order many items, we may need more time to process, it will not be more than 5 days, please be patient. Genaral it need 1-2weeks arrive your hand.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

1.14 Inch IPS OLED Display Module LCD Screen 135*240 RGB TFT for Arduino ST7789 LCD Board SPI Full Color HD OLED 8pi

Dear customers,welcome to LOF'S store ! Description ER-TFTM1.54-1 is 240x240 pixel 1.54 inch IPS tft lcd display with ST7789 controller and breakout board,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO,ARM and Raspberry PI.It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It's 4-wire serial spi interface with pin header connection. It's easily controlled by MCU such as 8051,PIC,AVR,ARDUINO,ARM and Raspberry Pi.It can be used in any embedded systems,industrial device,security,medical and hand-held device. Of course, we wouldn't just leave you with a datasheet and a "good luck!" We prepared the interfacing documents,libraries and examples for arduino due,mega 2560,uno,nano and for 8051 microcontroller user,we also prepared the interfacing document and demo code. Includes

1.8 inch TFT Full Color LCD Display Module SPI Serial Interface Module 128*160 ST7735 for Arduino 1.8-inch SPI serial screen with backplane module, requires at least 4 IO drivers Size: 1.8 inch SPI serial bus Resolution: 128*160 Driver IC: ST7735 The features of this module: 1. Support Arduino various MCU in-line without any wiring 2. Integrated voltage regulator IC, support 5V or 3.3V power supply 3. Onboard level shifting scheme, truly compatible with 5V/3.3V IO level. Support a variety of microcontroller IO connections 4. Integrated SD card expansion circuit, 5. Reserve SPI FLASH font circuit to facilitate extended applic

Hello everyone, our company is in Shenzhen。we specialize in selling electronic components. When we receive your order, we will process your order within 24 hours. If you order many items, we may need more time to process, it will not be more than 5 days, please be patient. Genaral it need 1-2weeks arrive your hand.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

1.44/1.8/2.2/2.4/2.8 Inch TFT Color Screen LCD Display Module Drive ST7735 ILI9341 Interface SPI 128*128 240*320 for Ar

Hello everyone, our company is in Shenzhen。we specialize in selling electronic components. When we receive your order, we will process your order within 24 hours. If you order many items, we may need more time to process, it will not be more than 5 days, please be patient. Genaral it need 1-2weeks arrive your hand.if you chat with us , we donot reply you, donot worry , we are try to handle your order.so pls donot cancel o

1.6 Inch OLED 1.6" TFT IPS OLED Transflective Display Module LCD Display DIY SPI Serial Port 130*130 Communicate for Ar

New lcd 3.2 "with ili9341 touch screen controller 3.2 "(75mm x 55mm) screen size Board size: 95mm x 65mm Screen resolution: 320x240 pixels Toucsreen: Yes (touch resitive) Controller: Ili9341-16 Interface data: 16bit Library support: Utft (rinky dink electronic) Arduino mega, due, Breakour shift register = tft shield v2.2 Note: - this lcd does not support arduino uno dg interface serial 8bit - in general, it uses the v.2.2 tft shield b

Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày Mô-đun LCD TFT Màn hình LCD TFT 2,4 inch cho Bảng Arduino UNO R3 và hỗ trợ mega 2560 với bút cảm ứng Tất cả các bưu kiện được gửi có số theo dõi. Vui lòng hỏi chúng tôi nếu bạn muốn mua thêm sản phẩm Sản phẩm này đã được lắp ráp hoàn chỉnh, thử nghiệm và sẵn sàng để được vận chuyển. Không có dây, không có hàn! Chỉ cần cắm vào và tải lên thư viện của chúng tôi - bạn sẽ có trong vòng 10 phút! Hoạt động tốt nhất với bất kỳ thiết bị cổ điển nào (UNO / Duemilanove / Diecimila). Sản phẩm này KHÔNG hoạt động với Mega nhưng tốc độ sẽ bằng một nửa tốc độ của bảng loại U vì cách Mega sắp xếp lại tất cả các chốt (không có cách nào để làm được điều này!) Mô đun này không tương thích với Leonardo Mô tả sản phẩm: Cung cấp cho thiết bị của bạn với mô đun màn hình cảm ứng lớn đẹp mắt với kết nối thẻ nhớ microSD tích hợp. Màn hình TFT này lớn (đường chéo 2,4 inch) sáng (4 đèn nền LED trắng) và nhiều màu sắc (18-bit 262.000 sắc thái khác nhau)! 240x320 pixel với điều khiển pixel riêng lẻ. Sản phẩm có độ phân giải cao hơn màn hình 128x64 đen trắng. Ngoài ra, màn hình này đã có màn hình cảm ứng điện trở được gắn vào, vì vậy bạn có thể phát hiện các thao tác nhấn ngón tay ở bất kỳ đâu trên màn hình. Chi tiết về kỹ thuật: Màn hình TFT LCD 2,4 " theo đường chéo Độ phân giải 240x320, 18-bit (262.000) màu bộ điều khiển spfd5408 với bộ đệm RAM video tích hợp Giao diện kỹ thuật số 8 bit, cộng với 4 đường điều khiển Sử dụng chân kỹ thuật số 5-13 và analog 0-3. Điều đó có nghĩa là bạn có thể sử dụng chân kỹ thuật số 2, 3 và analog 4 và 5. Pin 12 khả dụng nếu không sử dụng thẻ nhớ microSD Hoạt động với bất kỳ '328 hoặc Mega (Leonardo chưa được hỗ trợ) Tương thích 5V! Sử dụng với logic 3.3V hoặc 5V Bộ điều chỉnh LDO 3.3V 300mA tích hợp 4 đèn nền LED màu trắng. Bật theo mặc định nhưng bạn có thể kết nối bóng bán dẫn với chân kỹ thuật số để điều khiển đèn nền Màn hình cảm ứng điện trở

Thời gian giao hàng dự kiến cho sản phẩm này là từ 7-9 ngày Sản phẩm hoàn toàn mới 100% và chất lượng cao Mạch mở rộng màn hình LCD TFT 2.0inch. Màn hình có một bộ điều khiển được tích hợp với bộ đệm RAM, do đó hầu như không có công việc nào được thực hiện bởi vi điều khiển. Có các chấu nối của màn hình LCD và bước chân ngắt là 2.54mm, do đó việc phát triển thứ cấp dễ dàng hơn. Với mô-đun GPRS, bạn có thể thiết kế điện thoại Arduino của mình. Với mô-đun đọc NFC, bạn có thể tạo các hệ thống kiểm soát truy cập với hình ảnh hiển thị. Với cảm biến điện áp và cường độ, bạn có thể thực hiện đo dao động. Có thể trực tiếp sử dụng để hiển thị các ký tự, đồ họa và hình ảnh định dạng BMP. Khả năng tương thích: Vì mức logic là 3.3V, tương thích với bo mạch Arduino 3.3V, nên bạn thường cần thêm mạch chuyển đổi cấp nếu bạn sử dụng 5V Bảng mạch Arduino (Arduino UNO R3 / Arduino Mega2560 / Arduino Leonardo) Thông tin sản phẩm: Chất liệu: Linh kiện điện Thư viện Arduino: UTFT IC điều khiển: ILI9225 ILI9220 S6D1121 ST7775 ST7735, S6D1121 Loại màn hình cảm ứng: màn hình cảm ứng điện trở Bút cảm ứng: chiều dài là 9cm Độ phân giải: 176x220, màu sắc 16 bit (262.000) Kích thước màn hình: 2.0 inch Điện áp hoạt động: 3.3V Mức logic: 3.3V Dòng điện hoạt động: tối đa là 150mA Pin LED có thể kết nối với mạch điều khiển đèn nền bên ngoài để kiểm soát độ sáng của đèn nền. Bạn có thể kết nối với mạch GND để bật đèn nền cả ngày Rất thích hợp cho khung ảnh kỹ thuật số, máy hiện sóng, bộ tạo chức năng, màn hình hệ thống phát hiện Tải xuống ip: http: //www.winddeal.net/image2/tools/1A0850.rar Số lượng: 1 Chiếc Lưu ý: Hình ảnh chỉ mang tính tham khảo, IC điều khiển được phân phối ngẫu nhiên, vui lòng đánh giá dựa theo sản phẩm bạn nhận được Do sự khác biệt giữa các màn hình khác nhau, hình ảnh có thể không phản ánh màu sắc thực của sản phẩm. Cảm ơn bạn! Gói hàng bao gồm: 1 x Mô-đun 1 x Bút cả

#3.5\" #HMI #TFT #LCD #Touch #Display #Screen #Module #480x320 #for #Raspberry #Pi #3 #Arduino Features: 16-bit True Color RGB display Support a variety of configuration controls: button controls, progress bar controls, text controls, pointer controls With font: You can customize any WINDOWS font Support basic GUI instructions (drawing, drawing, drawing rectangle, etc.) Support picture format BMP, JPG, JPEG, PNG Support the host software automatically upgrade, the device firmware automatically upgrade 100-level backlight dimming, sleep mode, sleep current 20MA, support for wake-up function. Support serial download and SD card download two ways to support PC-side analog debugging, support simulator and equipment synchronization debugging Note: The LCD screen is Chinese version, buying carefully if you mind,thanks for your understanding. Specifications: Touch mode:Resistive touch Resolution: 480 * 320 Display area diagonal size: 3.5INCH Communication interface: USART serial interface Interface level 3.3V / 5V TTL level Working voltage: 4.75-7V Working temperature: -20-70 ℃ FLASH space: 16MB RAM space: 3584BYTE Product size:10*5.5cm/3.93*2.17inch Quantity：1Pc Note: Size for manual measurement, there may be a 0 to 2 cm error, belongs to the normal phenomenon. And due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package included: 1Pc x LCD Touch Display M

LCD controller chip ILI9341, touch panel control chip XPT2046; The use of industrial grade TFT LCD module; Module with Double row needles, better electrical performance; Compatible with all punctuality atomic development board, with a straight line; Description This 3.2 Inch TFT LCD Display is a LCD touch screen module. It has 40pins interface and SD card and Flash reader design. It is a powerful and mutilfunctional module for your project. The Screen include a controller SSD1289, it's a support 8/16bit data interface , easy to drive by many MCU like STM32 ,AVR and 8051. It is designed with a touch controller in it . The touch IC is ADS7843 , and touch interface is included in the 40 pins breakout. It is the version of product only with touch screen and touch controller. Feature - Material: Liquid Crystal - Size: 9.5cm x 6.5cm * 0.5cm - Weight: 57g - Pixel: 320x240 - Voltage: 3.3V - Interface: Serial Interface Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

♥Sincerely at your service！！！ Description ER-TFTM1.54-1 is 240x240 pixel 1.54 inch IPS tft lcd display with ST7789 controller and breakout board,superior display quality,super wide viewing angle and easily controlled by MCU such as 8051, PIC, AVR, ARDUINO,ARM and Raspberry PI.It can be used in any embedded systems,industrial device,security and hand-held equipment which requires display in high quality and colorful image.It's 4-wire serial spi interface with pin header connection. It's easily controlled by MCU such as 8051,PIC,AVR,ARDUINO,ARM and Raspberry Pi.It can be used in any embedded systems,industrial device,security,medical and hand-held device. Of course, we wouldn't just leave you with a datasheet and a "good luck!" We prepared the interfacing documents,libraries and examples for arduino due,mega 2560,uno,nano and for 8051 microcontroller user,we also prepared the interfacing document and demo code. Includes

Features: 1. LCD Size: 0.96 /1.3 inch 2. Dot Matrix Size: 80*160 (Display direction can be adjusted, horizontal screen and vertical screen are ok) 3. LCD Color: 65K Full Color 4. Hardware Interface: SPI interface 5. Driver IC: ST7735 6. Operating Temperature: -20 - 70 8. Working Power Supply: 3.3V 9. PIN NO: 13Pin 10. Display Area: 10.8*21.696mm 11. Size: 13.3*27.95mm 12 Viewing Direction: Full viewing angle (IPS) 1 GND 2 VCC (3.3-5 v) 3 SCL (SPI clock line) 4 SDA (SPI data cable) BLCK-LCD backlight control, the default can be left floating, low level to turn off the backlight RES-OLED reset, OLED needs to be reset after power-on DC-SPI data/command selection pin Specification: CS is a chip selection.This signal is called chip selection signal, generally cs, chip selection terminal received a legitimate chip selection signal will enter the working state,We can write or read it.Bank and chip select are mainly used for address decoding Product list: 1pc HD IPS inch 1.3 inch TFT display OLED st7735 Note: 1.Due to the manual measurement and different measurement methods, please allow 2-3cm deviation. 2.Please be reminded that due to lighting effects and monitor's brightness/contrast settings etc, the color tone of the website's photo and the actual item could be slightly different. #Serial #Shield #Blue #Backlight #1pcs #3.3V #HD #LCD #Arduino #Di

Features: 3.5in 480x320 TFT LCD screen, high quality image display and wide viewing angle. Compatible with Arduino Mega2560 development board directly, no any wiring needed.(SD card with 2560 is not supported). Provide 12 examples for Arduino and 3 examples of STM32. OnBorad level conversion chip for 5V/3.3V MCU, compatible with 3.3/5V operation voltage level. Compatible with Arduino-Series development Board, support Arduino Mega2560 Directly inserted. Specifications: Type:Touch screen,without touch  for you optional Package size: 10x5x3cm Package weight: 85g Packing list:  1x Color Screen Module   #forarduinodiy #iclcdscreen #8pin #ipsspihd65k #fullcolor #lcd #diy #tftmodule #lcddisplay #09

___________________❀OOID'S❀___________________ Welcome to our store, we insist on the lowest price to sell the best quality items. ✔Ready Stock ✔Wholesale Price ✔Quality Checked ★Surprises for you★ ☞Shop Voucher: Get More Discount ☞Follow Shop: Free Gifts ☞“Like” Items: Priority Shipping ( Sent us follow shop screenshot and remark on your order "Free Gift", if not will miss) ★★Attention Please★★ ✌We will be based on your guests in your country to send the corresponding adapter plug. _______________❀Product Information❀______________ Features: 1. This product can mount the chain on angle grinder and convert the angle grinder to a electric chainsaw. 2. The chain guide plate is forged by high carbon steel, durable and not easy to fracture. 3. Quenching chain is of high hardness and good wear resistance, smoothly cutting the wood. 4. The tightness of the chain is adjustable. 5. Equipped with wear-resistant metal baffle to prevent sawdust from spattering.   Specification: Material: High carbon steel + plastic Cutting diameter: 30cm/11.8in Chain tooth: 22 Chain circle length: 82cm/32.3inn Chain thickness: 4.7mm/0.18in Bracket length: 39cm/15.3in Handle length: 19cm/7.5in Package weight: Approx. 1403g/49.5oz   Package List: 1 x Guide Plate 1 x Chain 1 x Set of Fixed Aluminum Parts 1 x Handle 1 x Plastic Cover 1 x Metal Baffle Plate 1 x Oil Pot 1 x Fixed Screw Bag 1 x Chain Adjustment Screw Nut 1 x Wrench 1 x Manual   Note: This product does not include angle grinder. Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before orderi

0.96 inch 80x160 oled spi st7735 tft lcd description module for arduino esp8266 Specs and dimensions look at the pi

New 3.5 "lcd shield + touchscreen High quality lcd shield for arduino uno and mega 2560 Tft lcd type: Resolution: 480x320 pixels 3.5 inch lcd diagonal display Board size: 56x85mm Interface: Bus 8bit serial Driver: Ili9486 Id: 0x9486 Touch: Yes resitive Support arduino uno and mega Library: Mcufrien

❄ Welcome To Chitengyesuper ❄ Description: Display Type:3.5 inch TFT LCD screen Glass Type:TFT Display Resolution:480xRGBx320mm Back Light:6 inch Highlight White LED Control IC:ILI9486/ILI9488 Interface:16Bit paralell interface PCB Module Size:90.6*60.3mm LCD Area(W*H*T):84.96mm*55.5mm*2.55mm Active Area(W*H):73.44mm*48.96mm Package Included: 1pcs 3.5 inch tft lcd screen module 1pcs arduino 2560 r3 board 1pcs

✪✪Welcome to {steedsuhhno}, your support is our greatest driving force, we will definitely give you the most comfortable shopping experience!!!✪✪ Item Description 1.Features SIZE 1.44 inch Display Mode a-TFT Display Format 128RGB*128 dots matrix Input Data SPI interface Drive IC ST7735S Dimensional outline 300(W)*46.50(H)*3.45+/-0.1(T)mm Resolution 128RGB*128 Dots LCD Active area 25.50 (W)*26.50 (H) Pixel size 0.20(W)*0.20(H)mm Viewing Direction 12 o’clock Operating Temperature -20～70°C 2.Pin Descriptions： PIN No Symbol Description GND Ground VCC Power 3.3V SCL Serial clock pin. SDA Serial data input RES LCM Reset pin This pin is reset signal input. When the pin is low, initialization of the chip is Executed. Keep this pin pull high during normal operation. DC Data/Command Control CS Chip Select BLK Backlight control pin 3. Connected to the microcontroller Package included: 1x 1.44 inch Full Color 128x128 SPI TFT LCD Display M