Max7219 led matrix arduino

------------------------------------------- Official store of kingcell @ shopee Arduino board & modules supplier --------------------------------------------- Matrix led 8x8 module. 32x32mm. Driver - max7219 / 7221 Pixel pacifier: 8x8 Color: Yellow 32mm x 32mm Voltage: 5v dc Driver: Max

Model max7219 Can drive an 8x8 common cathode lattice Module with input and output interfaces support multiple modules cascade The left of the module has an input port and the right an output port The control of a single module, simply input port to the cpu Multiple modules cascade input termination cpu, 2 output termination module, a module of the input of the input terminal, the output terminal of the first two modules of the first three modules, and so on Specs: Operating voltage: 5v With four screws hole 3mm For example 51 mcu: Vcc - 5v. Gnd - gnd Din - p22 Cs - p21 Clk - p20 Size of the borad: 5x3.2cm Net weight: 17 g. Package weight: 27g As shown in the pic

☘ Dot matrix 8x8 display with max7219 led module for arduino 🔘🔘🔘 Features: Model max7219 Can drive an 8x8 common cathode lattice Module with input and output interfaces support multiple modules cascade The left of the module has an input port and the right an output port Specs: Operating voltage: 5v With four screws hole For example 51 mcu: Vcc - 5v. Gnd - gnd Din - p22 Cs - p21 Clk - p20 Size of the borad: 5x3.2cm Net weight: 17 g. Package weight: 27g As shown in the pictures 🔘🔘🔘 🤱🎵 Read compulsory notes before transactions 🤱🎵 Check stock before order 🤱🎵 The products that have been purchased cannot be returned 🤱🎵 Do not accept any return & complaint in any form 🤱🎵 Dot matrix 8x8 display with max7219 led module for ar

Brand New MAX7219 is an integrated serial input / output common-cathode display driver It connects the microprocessor with 8 digits 7-segment digital LED display Can be connected a bar graph display or 64 independent LEDs A single ule can drive a total of 8 * 8 dot matrix overcast ule voltage: 5V ule Size: 12.8 cm (length) X 3.2 cm (width) X 1.3 cm (height) With 64 fixing screw holes, diameter : 3mm ule with input and output interfaces, support for cascading multiple ules Included in this package: 1X Max7219 Display Board 1 Set of Cable for Max7219 Board Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

------------------------------------------- Official store of kingcell @ shopee Arduino board & modules supplier --------------------------------------------- Arduino library: https://drive•google•com/open?id=0B7t_g4hdtuI

Features: Model max7219 Can drive an 8x8 common cathode lattice Module with input and output interfaces support multiple modules cascade The left of the module has an input port and the right an output port The control of a single module, simply input port to the cpu Multiple modules cascade input termination cpu, 2 output termination module, a module of the input of the input terminal, the output terminal of the first two modules of the first three modules, and so on Specs: Operating voltage: 5v With four screws hole 3mm For example 51 mcu: Vcc - 5v. Gnd - gnd Din - p22 Cs - p21 Clk - p20 Size of the borad: 5x3.2cm Net weight: 17 g. Package weight: 27g As shown in the pic

Brand New MAX7219 is an integrated serial input / output common-cathode display driver It connects the microprocessor with 8 digits 7-segment digital LED display Can be connected a bar graph display or 64 independent LEDs A single module can drive a total of 8 * 8 dot matrix overcast Module voltage: 5V Module Size: 12.8 cm (length) X 3.2 cm (width) X 1.3 cm (height) With 64 fixing screw holes, diameter : 3mm Module with input and output interfaces, support for cascading multiple modules Included in this package: 1X Max7219 Display Board 1 Set of Cable for Max7219 Board Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Max7219 is an integrated serial input / output common-cathode display drivers , Which connects the microprocessor 7-segment digital led display with 8 digits , Graph can also be connected monitor or 64 separate led. On type b bcd encoder includes an on-chip , Multi-channel scanning loop , Segment word drive., But also a 8x8 static ram for storing each data. Only one external register is used to set the segment current for each led. A convenient four-wire series interface can connect all common microprocessor. Each data can be added in the update does not overwrite all of the display. Max7219 also allows the user to select each of the data code or not coded. The entire device includes a 150a low-power shutdown mode , Analog and digital brightness control , A scan-limit register allows the user to 1-8 bits of data , There is an led light so that all the detection mode Requires only three io ports can drive a dot! No. Flashing dot matrix display! Support cascade! - single module can drive a common cathode 8x8 dot matrix - operating voltage module 5v 5cm x 3.2cm wide x 1.5cm high size module Holes with four screws, 3mm diameter, can be fixed by using our m3 studies Mdules with input and output interfaces, support for cascading multiple modules 1x max7219 8x8 dot led matrix module for ar

Brand New MAX7219 is an integrated serial input / output common-cathode display driver It connects the microprocessor with 8 digits 7-segment digital LED display Can be connected a bar graph display or 64 independent LEDs A single ule can drive a total of 8 * 8 dot matrix overcast ule voltage: 5V ule Size: 12.8 cm (length) X 3.2 cm (width) X 1.3 cm (height) With 64 fixing screw holes, diameter : 3mm ule with input and output interfaces, support for cascading multiple ules Included in this package: 1X Max7219 Display Board 1 Set of Cable for Max7219 Board Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Dear customers,welcome to smallbrains store! Features : 100% Brand new and high quality MAX7219 digital display control module This module is compatible with 5V and 3.3V microcontrollers. You you can use it for Arduino MAX7219 is an integrated serial input / output common-cathode display driver, Which connects your microprocessor to a 7-segment digital LED display with 8 digits. Only three IO ports are used to drive the eight digit display. MAX7219 supports flicker free displays as well as cascading displays. Wiring instructions(for example, it can connect any IO port, Modified the Port Definition in the program): VCC: 5V GND: GND DIN: P00 CS: P01 CLK: P02 Note: VCC and GND should not be connected reversed, so as not to burn the chip Specifications: Material: PCB + Electronic Components Power: 5V Size: 82*15*12mm(L*W*H) Shell Color: Blue & black Package Included: 1PCS * MAX7219 LED Dot Matrix 8 Digit Digital Tube Display Control Module For Arduino Thank you for your visi

Description: 1 single module can drive an 8x8 dot matrix common cathode 2 operating voltage module: 5v 3.2cm x 3.2cm wide x 1.3cm high length dimensional 3.0 module 4 holes with four screws 3mm diameter 5 modules with input and output interfaces support for cascading multiple mo

💸 Dot matrix module 8x8 led max7219 dip for arduino + library 🤢🤢🤢🤢 Arduino library: 🌄🌄🌄🌄 📣 Read compulsory notes before transactions 📣 Check stock before order 📣 The products that have been purchased cannot be returned 📣 Do not accept any return & complaint in any form 📣 Dot matrix module 8x8 led max7219 dip for arduino + li

🎉🎉🎉 Welcome to my shop, wish you have a happy day!!! 🌝MAX7219 LED Dot Matrix 8 Digit Digital Tube Display Control Module For Arduino Features : 100% Brand new and high quality MAX7219 digital display control module This module is compatible with 5V and 3.3V microcontrollers. You you can use it for Arduino MAX7219 is an integrated serial input / output common-cathode display driver, Which connects your microprocessor to a 7-segment digital LED display with 8 digits. Only three IO ports are used to drive the eight digit display. MAX7219 supports flicker free displays as well as cascading displays. Wiring instructions(for example, it can connect any IO port, Modified the Port Definition in the program): VCC: 5V GND: GND DIN: P00 CS: P01 CLK: P02 Note: VCC and GND should not be connected reversed, so as not to burn the chip Specifications: Material: PCB + Electronic Components Power: 5V Size: 82*15*12mm(L*W*H) Shell Color: Blue & black Package Included: 1PCS * MAX7219 LED Dot Matrix 8 Digit Digital Tube Display Control Module For Ar

Brand New MAX7219 is an integrated serial input / output common-cathode display driver It connects the microprocessor with 8 digits 7-segment digital LED display Can be connected a bar graph display or 64 independent LEDs A single ule can drive a total of 8 * 8 dot matrix overcast ule voltage: 5V ule Size: 12.8 cm (length) X 3.2 cm (width) X 1.3 cm (height) With 64 fixing screw holes, diameter : 3mm ule with input and output interfaces, support for cascading multiple ules Included in this package: 1X Max7219 Display Board 1 Set of Cable for Max7219 Board Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

【MLMY】MAX7219 LED Dot Matrix 8 Digit Digital Tube Display Control Module For ArduinoFeatures : 100% Brand new and high quality MAX7219 digital display control module This module is compatible with 5V and 3.3V microcontrollers. You you can use it for Arduino MAX7219 is an integrated serial input / output common-cathode display driver, Which connects your microprocessor to a 7-segment digital LED display with 8 digits. Only three IO ports are used to drive the eight digit display. MAX7219 supports flicker free displays as well as cascading displays. Wiring instructions(for example, it can connect any IO port, Modified the Port Definition in the program): VCC: 5V GND: GND DIN: P00 CS: P01 CLK: P02 Note: VCC and GND should not be connected reversed, so as not to burn the chip Specifications: Material: PCB + Electronic Components Power: 5V Size: 82*15*12mm(L*W*H) Shell Color: Blue & black Package Included: 1PCS * MAX7219 LED Dot Matrix 8 Digit Digital Tube Display Control Module For Ar

Device Here Is A Led Dot Matrix Resolution 32 X 8 Using Driver Max. 7219 Yang Got it Used As Screen Display To Display Text Walk Or Animation Yang Arranged From - led. Specs: 1. Resolution: 32 x8 2. Work voltage: 5 volts 3. Communication: Spi series 4. Number of pins: Male 5pcs (vcc, gnd, din, cs, clock) 5. Dimensions: 12.8cm x 3.2cm x 1.3cm 6. Red led dot matrix color # Pin configuration Pin module - - - - - - > pin arduino Clock - - > pin 13 Cs - - > pin 10 D in-- > pin 11 Vcc - - > + 5v Gnd - - > gnd #In pack. 1pcs led dot matrix 32x8 1pcs male pin extension 5pcs female-female jumper cable Tutorial videos can be accessed here: https://www.youtube.com/watch?v=e_pY-uGkDFA&t

Brand New MAX7219 is an integrated serial input / output common-cathode display driver It connects the microprocessor with 8 digits 7-segment digital LED display Can be connected a bar graph display or 64 independent LEDs A single ule can drive a total of 8 * 8 dot matrix overcast ule voltage: 5V ule Size: 12.8 cm (length) X 3.2 cm (width) X 1.3 cm (height) With 64 fixing screw holes, diameter : 3mm ule with input and output interfaces, support for cascading multiple ules Included in this package: 1X Max7219 Display Board 1 Set of Cable for Max7219 Board Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Ready cod. Dot matrix 3x8 display with max7219 led module for arduino Description: 1 single module can drive an 8x8 dot matrix common cathode 2 operating voltage module: 5v 3 dimensions 12.8 cm x 3.2cm wide x 1.3 cm high length module 4 holes with screws 3mm diameter 5 modules with input and output interfaces, support for cascading multiple modules. Arduino sketch sample: #Inclusive spi.h. #Inclusive adafruit_gfx.h #Including max72xxpanel.h Int number ofhorizontaldisplays = 1; Int numberofverticaldisplays = 4; String tape = "let 's learn arduino"; Int wait = 50; / / in milliseconds Int spaces = 1; Int width = 5 + spacer; / / the font width is 5 pixels Setup void () ( Matrix.setintensity (7); / / use a value between 0 and 15 for brightness Adjustable to your own needs. Matrix.setrotation (matrix.getrotation () + 1); / / the first display is position upside down / / matrix.setrotation (1, 1); / / the first display is position upside down } Void loop () ( For (int i = 0; i < width x tape.length () + matrix.width () - 1 - spacer; i + +) ( Matrix.fillscreen (low); Int letter = i / width; Int x = (matrix.width () - 1) - i% width; Int y = (matrix.height () - 8) / 2; / / center the text vertically While (x + width - spacer > = 0 & & letter > = 0) If (letter < tape.length ()) ( Matrix.drawchar (x, y, tapeletter, high, low, 1); } Letter--; X - = width; } Matrix.write (); / / send bitmap to display Delay (wait)

. Welcome to cv. Appropriate technology Description: 1 single module can drive an 8x8 dot matrix common cathode 2 operating voltage module: 5v 3.2cm x 3.2cm wide x 1.3cm high length dimensional 3.0 module 4 holes with four screws 3mm diameter 5 modules with input and output interfaces support for cascading multiple modules Happy shopping... Thank

Dsp-0067 Description: Max7219 digital display control module This module is compatible with 5v and 3.3v microcontrollers. You can use it for arduino Max7219 is an integrated serial input / output common-cathode display driver, Which connects your microprocessor to a 7-segment digital led display with 8 digits. Only three io ports are used to drive the eight digit display. Wire instructions (for example, it can connect any io port, Modified the port definition in the program: Vcc: 5v Gnd: Din: P00. Cs: P01. Clk: P02 Note: Vcc and gnd should not be connected upside down, so as not to burn chips Specifications: Pcb + electronic components material Power: 5v. Size: 82x15 x 12mm (lxwxh) Shell color: Blue & black Net weight: 13g Package: 1 x max7219 led dot matrix 8-digit digital tube display control m

Dot matrix 8x8 display with max7219 led module for arduino Description: 1 single module can drive an 8x8 dot matrix common cathode 2 operating voltage module: 5v 3 dimensions 12.8 cm x 3.2cm wide x 1.3 cm high length module 4 holes with screws 3mm diameter 5 modules with input and output interfaces, support for cascading multiple modules. Arduino sketch sample: #Including spi.h. #Inclusive adafruit_gfx.h #Including max72xxpanel.h Int pins = 10; / / attach cs to this pin, din to mosi and clk to sck (cf http://arduino•cc/en/Reference/SPI ) Int number ofhorizontaldisplays = 1; Int numberofverticaldisplays = 4; Max72xxpanel matrix = max72xxpanel (pins, numberofhorizontaldisplays, numberofverticaldisplays); String tape = "let 's learn arduino with da electronics"; Int wait = 50; / / in milliseconds Int spaces = 1; Int width = 5 + spacer; / / the font width is 5 pixels Setup void () ( Matrix.setintensity (7); / / use a value between 0 and 15 for brightness Adjustable to your own needs Matrix.setrotation (matrix.getrotation () + 1); / / the first display is position upside down / / matrix.setrotation (1, 1); / / the first display is position upside down } Void loop () ( For (int i = 0; i < width x tape.length () + matrix.width () - 1 - spacer; i + +) ( Matrix.fillscreen (low); Int letter = i / width; Int x = (matrix.width () - 1) - i% width; Int y = (matrix.height () - 8) / 2; / / center the text vertically While (x + width - spacer > = 0 & & letter > = 0) If (letter < tape.length ()) ( Matrix.drawchar (x, y, tape (letter), high, low, 1); } Letter--; X - = width; } Matrix.write (); / / send bitmap to display Delay (wait)

Matrix led 8x8 module. 32x32mm. Driver - max7219 / 7221 Pixel pacifier: 8x8 Color: Yellow 32mm x 32mm Voltage: 5v dc Driver: Max

Brand New MAX7219 is an integrated serial input / output common-cathode display driver It connects the microprocessor with 8 digits 7-segment digital LED display Can be connected a bar graph display or 64 independent LEDs A single ule can drive a total of 8 * 8 dot matrix overcast ule voltage: 5V ule Size: 12.8 cm (length) X 3.2 cm (width) X 1.3 cm (height) With 64 fixing screw holes, diameter : 3mm ule with input and output interfaces, support for cascading multiple ules Included in this package: 1X Max7219 Display Board 1 Set of Cable for Max7219 Board Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Model max7219 Can drive an 8x8 common cathode lattice Module with input and output interfaces support multiple modules cascade The left of the module has an input port and the right an output port The control of a single module, simply input port to the cpu Multiple module cascade input termination cpu 2 output termination module a Module of the input of the input terminal, the output terminal of the first two Module of the first three modules, and so on Specs: Operating voltage: 5v With four screws hole 3mm For example 51 mcu: Vcc - 5v. Gnd - gnd Din - p22 Cs - p21 Clk - p20 Size of the borad: 5x3.2cm Net weight: 17 g. Package weight: 27g As shown in the pic

Brand New MAX7219 is an integrated serial input / output common-cathode display driver It connects the microprocessor with 8 digits 7-segment digital LED display Can be connected a bar graph display or 64 independent LEDs A single ule can drive a total of 8 * 8 dot matrix overcast ule voltage: 5V ule Size: 12.8 cm (length) X 3.2 cm (width) X 1.3 cm (height) With 64 fixing screw holes, diameter : 3mm ule with input and output interfaces, support for cascading multiple ules Included in this package: 1X Max7219 Display Board 1 Set of Cable for Max7219 Board Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Dot matrix 3x8 display with max7219 led module for arduino Description: 1 single module can drive an 8x8 dot matrix common cathode 2 operating voltage module: 5v 3 dimensions 12.8 cm x 3.2cm wide x 1.3 cm high length module 4 holes with screws 3mm diameter 5 modules with input and output interfaces, support for cascading multiple modules. Arduino sketch sample: #Inclusive spi.h. #Inclusive adafruit_gfx.h #Including max72xxpanel.h Int number ofhorizontaldisplays = 1; Int numberofverticaldisplays = 4; String tape = "let 's learn arduino"; Int wait = 50; / / in milliseconds Int spaces = 1; Int width = 5 + spacer; / / the font width is 5 pixels Setup void () ( Matrix.setintensity (7); / / use a value between 0 and 15 for brightness Adjustable to your own needs. Matrix.setrotation (matrix.getrotation () + 1); / / the first display is position upside down / / matrix.setrotation (1, 1); / / the first display is position upside down } Void loop () ( For (int i = 0; i < width x tape.length () + matrix.width () - 1 - spacer; i + +) ( Matrix.fillscreen (low); Int letter = i / width; Int x = (matrix.width () - 1) - i% width; Int y = (matrix.height () - 8) / 2; / / center the text vertically While (x + width - spacer > = 0 & & letter > = 0) If (letter < tape.length ()) ( Matrix.drawchar (x, y, tapeletter, high, low, 1); } Letter--; X - = width; } Matrix.write (); / / send bitmap to display Delay (wait)

. Welcome to cv. Appropriate technology Max7219 is an integrated serial input / output common-cathode display drivers, which connects the microprocessor 7-segment digital led display with 8 digits, bar graph can also be connected monitor or 64 separate led. On type bcd encoder includes an on-chip, multi-channel scanning loop, segment word drive, but also a 8x8 static ram for storing each data. Only one external register is used to set the segment current for each led. A convenient four-wire series interface can connect all common microprocessor. Each data can be added in the update does not overwrite all of the display. Max7219 also allows the user to select each of the data code or not coded. The entire device includes a 150a low-power shutdown mode, analog and digital brightness control, a scan-limit register allows the user to 1-8 bits of data, there is an led light so that all the detection mode. Requires only three io ports can drive a dot! No. Flashing dot matrix display! Support cascade! - single module can drive a common cathode 8x8 dot matrix - operating voltage module: 5v - module size: 5 cm x 3.2 cm wide x 1.5 cm high - holes with four screws , Diameter 3mm, Can be fixed by using our m3 studies - mdules with input and output interfaces , Support for cascading multiple module packages 1x max7219 8x8 dot led matrix module for arduino Happy shopping... Thank

Features: Model max7219 Can drive an 8x8 common cathode lattice Module with input and output interfaces support multiple modules cascade The left of the module has an input port and the right an output port The control of a single module, simply input port to the cpu Multiple modules cascade input termination cpu, 2 output termination module, a module of the input of the input terminal, the output terminal of the first two modules of the first three modules, and so on Specs: Operating voltage: 5v With four screws hole 3mm For example 51 mcu: Vcc - 5v. Gnd - gnd Din - p22 Cs - p21 Clk - p20 Size of the borad: 5x3.2cm Net weight: 17 g. Package weight: 27g As shown in the picture

Dot matrix 8x8 display with max7219 led module for arduino Features: Model max7219 Can drive an 8x8 common cathode lattice Module with input and output interfaces support multiple modules cascade The left of the module has an input port and the right an output port Specs: Operating voltage: 5v With four screws hole For example 51 mcu: Vcc - 5v. Gnd - gnd Din - p22 Cs - p21 Clk - p20 Size of the borad: 5x3.2cm Net weight: 17 g. Package weight: 27g As shown in the pictures Cultivate reading before buying: X) color & size selection is only through the "information / note" column during the order, not through chat & diskussion. *) It is mandatory to document when opening a video package in case anything is inappropriate / damaged / defective as a condition of return in our store X) if you decide to buy then we assume you agree with the above rules X) do not accept any return & complaint "Read compulsory notes before transactions." "Check stock before order" "The product that has been bought cannot be returned." "Don 't accept return and complain in any form." Xnb: Please confirm or add review when the item is received. Happy shopping!

Brand New MAX7219 is an integrated serial input / output common-cathode display driver It connects the microprocessor with 8 digits 7-segment digital LED display Can be connected a bar graph display or 64 independent LEDs A single ule can drive a total of 8 * 8 dot matrix overcast ule voltage: 5V ule Size: 12.8 cm (length) X 3.2 cm (width) X 1.3 cm (height) With 64 fixing screw holes, diameter : 3mm ule with input and output interfaces, support for cascading multiple ules Included in this package: 1X Max7219 Display Board 1 Set of Cable for Max7219 Board Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1