Nvme sang pci-e 16x

12+16pin 2014 2015 macbook to M.2 NGFF M-Key SSD Convert Card for A1493 A1502 A1465 A1466 The adapter can covert the NGFF M-key SSD to the 12+16pin 2014 2015 macbook SSD. Note: Only support M-key AHCI SSD, don't support NVME SSD. The adapter only work for M-key SSD, cannot work for B-key or B/M-key socket. Compatibility With: 2013 macbook Pro A1493 A1502 ( MD864 MD865 MD293 Md294) SSD 2013 macbook Pro retina A1398 A1502 (ME864 ME865 ME866 ME293 ME294) SSD 2013 macbookAir A1465 A1466 ( MD711 MD712 MD760 MD761) SSD 2014 macbook Air A1465 A1466 ( MD711 MD712 MD760 MD761) SSD 2014 macbook Pro retina A1502 A1398 (MGX72 MGX82 MGX92 MGXA2 MGXC2) SSD 2015 macbook Pro retina A1502 A1398(MF839 MF840 MF841 MGXA2 MGXC2) SSD 2015 macbook Air A1465 A1466(MJVM2 MJVP2 MJVE2 MJVG2) and mac pro ME253 MD878 SSD 2017 version macbook Air A1466(MQD32 MQD42 MQD52) Package Included:1 x Card adapter(Not includes the ssd show on the picture

Welcome to ARedhot store, have a good shopping! Features: 1.M key M.2 NGFF SSD to PCIe X4 adapter. 2.The speed and other properties is not changed,only form conversion interface. 3.Support Type 2230/2242/2260/2280 type M.2 Card dimension. 4.Transparent to the operating system and does not require any software drivers. System requirement: Motherboard: Z97 or later, Windows 10 or later Note: The SSD of the PCI-E NGFF NVME (M.2 M KEY SSD) interface is identified by the computer's PCI-E X4 or X8 or X16 interface (that is, the PCI-E graphics interface).Be sure to check if your computer has this interface before you buy it. If you don't have it, you can't use it. If your motherboard chipset is below 9 series, do not use PCIE X4 hard drives such as pm951, sm951, pm950! After the SSD of the PCI-E NGFF interface is transferred through the PCI-EX4 or X8 or X16 interface of the computer, entering the operating system can be correctly identified, ordinary computers can not be seen under the BIOS,Therefore, system startup is not supported unless your computer motherboard BIOS supports PCI-E device booting! Include:1x adapter riser card conv

Welcome to shakangcool store, have a good shopping! Features: 1.M key M.2 NGFF SSD to PCIe X4 adapter. 2.The speed and other properties is not changed,only form conversion interface. 3.Support Type 2230/2242/2260/2280 type M.2 Card dimension. 4.Transparent to the operating system and does not require any software drivers. System requirement: Motherboard: Z97 or later, Windows 10 or later Note: The SSD of the PCI-E NGFF NVME (M.2 M KEY SSD) interface is identified by the computer's PCI-E X4 or X8 or X16 interface (that is, the PCI-E graphics interface).Be sure to check if your computer has this interface before you buy it. If you don't have it, you can't use it. If your motherboard chipset is below 9 series, do not use PCIE X4 hard drives such as pm951, sm951, pm950! After the SSD of the PCI-E NGFF interface is transferred through the PCI-EX4 or X8 or X16 interface of the computer, entering the operating system can be correctly identified, ordinary computers can not be seen under the BIOS,Therefore, system startup is not supported unless your computer motherboard BIOS supports PCI-E device booting! Include:1x adapter riser card conv

Special statements: m.2 in support of the nvme agreements for samsung pm961, 960evo, sm961, pm951, sm951, intel 600p, jianxing t10 and others.M.2 of the sata protocol is not supported. Psi - e signal ssd m. 2 is all key - m. Pcie nvme m.2m key type m.2 ssd to pcie 4x 8x 16x extension card adapter card Product name: pcie nvme m.2m key ssd to pcie 4x 8x 16x Extension card adapter card (m.2m key m.2 ssd to pcie 3.0 16x adapter card pci e 3.0 4x 2230-2280 m.2 full speed) Input interface: support m-key m.2 nvme (m.2 ngff not support sata protocol) Output interface: pcie 4x 8x 16x Support slot: pcie 4x 8x 16x Support equipment: nvme m. 2 ssd solid disk for various pcie protocols Support system: windows 8/10/linux M.2 nvme ssd to pcie 3.0 4x 8x 16x Adapter m key interface card support pci express 3.0 x4 2230-2280 size m.2 full speed Product name: pcie nvme m.2 ssd to pcie 4x 8x 16x Executive card Input interface: m-key m.2 nvme (don't support sata protocol m.2) Output interface: pcie 4x 8x 16x Support clot: pcie 4x 8x 16x Support documents: various pcie protocols nvme m.2 ssd Support system: windows8/10/

Welcome to Abongsea store, have a good shopping! Features: 1.M key M.2 NGFF SSD to PCIe X4 adapter. 2.The speed and other properties is not changed,only form conversion interface. 3.Support Type 2230/2242/2260/2280 type M.2 Card dimension. 4.Transparent to the operating system and does not require any software drivers. System requirement: Motherboard: Z97 or later, Windows 10 or later Note: The SSD of the PCI-E NGFF NVME (M.2 M KEY SSD) interface is identified by the computer's PCI-E X4 or X8 or X16 interface (that is, the PCI-E graphics interface).Be sure to check if your computer has this interface before you buy it. If you don't have it, you can't use it. If your motherboard chipset is below 9 series, do not use PCIE X4 hard drives such as pm951, sm951, pm950! After the SSD of the PCI-E NGFF interface is transferred through the PCI-EX4 or X8 or X16 interface of the computer, entering the operating system can be correctly identified, ordinary computers can not be seen under the BIOS,Therefore, system startup is not supported unless your computer motherboard BIOS supports PCI-E device booting! Include:1x adapter riser card conv

Feature: 1. Support for MPM2 of NVME agreement such for Samsung PM961, for 960EVO, for SM961, for PM951, for sm951, for INTEL 600P, for Lite T10. SATA protocol M.2 is not supported. 2. PCIE NVME m.2 M Key type M.2 SSD to PCIE 4X 8X 16X. 3. SSD M.2 of PCI-E signal is generally KEY-M. 4. Support equipment: various PCIE protocol NVME m.2 SSD solid state drives. 5. Support for windows8 / 10 / for Linux system. Specification: Item Type: Adapter Card Expansion Card Adapter Card: M.2 M Key type M.2 solid state drive SSD to PCIE 3.0 16X adapter card PCI E 3.0 4x 2230-2280 M.2 full speed Input Interface: Support M-Key M.2 NVME (does not support SATA protocol M.2 NGFF) Output Interface: PCIE 4X 8X 16X Support Slot: PCIE 4X 8X 16X Support Equipment: Various PCIE protocol NVME m.2 SSD solid state drives Support System: for windows 8 / 10 / for Linux Package List: 1 x Adapter Card 1 x Foam St

Welcome to our store,I wish you have a good shopping. Features: -M key M.2 NGFF SSD to PCIe X4 adapter. -The speed and other properties is not changed,only form conversion interface. -Support Type 2230/2242/2260/2280 type M.2 Card dimension. -Transparent to the operating system and does not require any software drivers. System requirement: Motherboard: Z97 or later, Windows 10 or later Note: The SSD of the PCI-E NGFF NVME (M.2 M KEY SSD) interface is identified by the computer's PCI-E X4 or X8 or X16 interface (that is, the PCI-E graphics interface).Be sure to check if your computer has this interface before you buy it. If you don't have it, you can't use it. If your motherboard chipset is below 9 series, do not use PCIE X4 hard drives such as pm951, sm951, pm950! After the SSD of the PCI-E NGFF interface is transferred through the PCI-EX4 or X8 or X16 interface of the computer, entering the operating system can be correctly identified, ordinary computers can not be seen under the BIOS,Therefore, system startup is not supported unless your computer motherboard BIOS supports PCI-E device booting! Include:1x adapter riser card converter ❤[Store] Our shop mainly deals with mother and baby, fashion accessories and household goods.when you finished and received your order,pls don't waste your fiv e stars,we aim to provide a good service,it's our honor to serve for you! ❤: If you have any questions, please contact us first, don't post bad comments, thank you for your cooperation, we will be

#32G/bps #PCI-e #3.0 #16x #To #M2 #M.2 #NVMe #Key-M #2230 #2242 #2260 #2280 #Riser #Card Product features: Wire advantage, using German patented imported wire, using Taiwan imported High quality connector, high frequency support PCIe 3.0 stable transfer. Supports 2230/2242/2260/2280 type M.2 key M interface. Supports PCI-E 1X/4X/8X/16X card Supports Windows10/8/7/2000，I OS or Linux Cable length: 20cm System Requirement: M.2 Key M slot on mainboard Package contents: 1x NGFF to PCIe X16 Extension Cable 2x M2 Screw 1x screw driver 1x 4P to SATA

#32G/bps #PCI-e #3.0 #16x #To #M2 #M.2 #NVMe #Key-M #2230 #2242 #2260 #2280 #Riser #Card Product features: Wire advantage, using German patented imported wire, using Taiwan imported High quality connector, high frequency support PCIe 3.0 stable transfer. Supports 2230/2242/2260/2280 type M.2 key M interface. Supports PCI-E 1X/4X/8X/16X card Supports Windows10/8/7/2000，I OS or Linux Cable length: 20cm System Requirement: M.2 Key M slot on mainboard Package contents: 1x NGFF to PCIe X16 Extension Cable 2x M2 Screw 1x screw driver 1x 4P to SATA

1. Wire advantages: high frequency support PCIe 3.0 X16 8G/bps stable transfer. 2.Cable length:25cm, our wire has a low impedance, 25cm cable can be stable at PCIe3.0 full speed reading and writing. 3.Differential signal without hole design, there is no problem of signal attenuation interference in a parasitic capacitance and parasitic inductance, there will be no more CAF Mini short circuit, cable is durability. 4.PCB use high frequency low resistance of materials with high quality, PCB using high TG board, copper thickness thicken to 1oz, gold finger plating enough gold, Good conductive performance, can reduce oxidize higher impedance caused by the crash blue screen. 5.Suitable graphics card: for GTX1080ti High-end graphics CARDS, fireprow7100, radeon RX580, VEGA64, prowx5100, quadroK1200 professional graphics card, support for all the PCIe CARDS after 2015 years.Note: This product does not support external notebook graphics!Our all cables doesn't support the machine with 2x CPUs. Colour:black Material:PCB Size:Length: 25cm Package Contents: 1 * Extension CableOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

______________♤Welcome Hahao Store♤_______________ ✔Ready Stock!!Buy Now! ✔Quality Checked ✔Best price ★Surprises for you★ ✌(Tip:We will be based on your guests in your country to send the corresponding adapter plug) ➷Wholesale retailers are welcome to negotiate long-term business with us! __________________❀Product Information❀__________________ Feature: -Support for MPM2 of NVME agreement such for Samsung PM961, for 960EVO, for SM961, for PM951, for sm951, for INTEL 600P, for Lite T10. SATA protocol M.2 is not supported. -PCIE NVME m.2 M Key type M.2 SSD to PCIE 4X 8X 16X. -SSD M.2 of PCI-E signal is generally KEY-M. -Support equipment: various PCIE protocol NVME m.2 SSD solid state drives. -Support for windows8 / 10 / for Linux system. Specification: Item Type: Adapter Card Expansion Card Adapter Card: M.2 M Key type M.2 solid state drive SSD to PCIE 3.0 16X adapter card PCI E 3.0 4x 2230-2280 M.2 full speed Input Interface: Support M-Key M.2 NVME (does not support SATA protocol M.2 NGFF) Output Interface: PCIE 4X 8X 16X Support Slot: PCIE 4X 8X 16X Support Equipment: Various PCIE protocol NVME m.2 SSD solid state drives Support System: for windows 8 / 10 / for Linux Package List: 1 x Adapter Card 1 x Foam

PCI-e 4x/8x/16x to M2 NVMe SSD Card allows adding nvme SSD to your PC at perfect performance Compatible with M.2 SSDs (NVMe): 80x22mm, 60x22mm and 42x22mm. Such as PM961, 961EVO This M2 SSD adapter can Only Support M.2 PCI-e Based M Key Nvme SSD. DO NOT support PCI-e M Key AHCI SSD, SATA based B+M key or B Key SSD. Silicone thermal pad, it can realize the full potential of Heat Dissipation,Ensure a long lasting fast transfer. 1,High-Speed transfer 2,Shell groove design 3,Heat sink,Thermal pad 4,Supports PCIE M.2 SSD (NVMe or AHCI, Key-M), PCIE 3.0 X4 32 Gbps bandwidth Not supported SATA-based M.2 SSD Apply to 2280/2260/2242 / 2230mm M.2 SSD Support TRIM and UASP PCIE X16 lane installation Supports PCIe 1.0, PCIe 2.0 and PCIe 3.1 motherard Compatible with Windows/MAC/Linux, no driver required Colour: Black Material: PC board + metal Package Contents: 1* M2 NVME Adapter 1* silicone pad 1* ScrewdriverOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

_______♤Welcome Apill Store♤___________ ✔Ready Stock!!Buy Now! ✔Quality Checked ✔Best price ✔Brand new 100% ★Surprises for you★ ✌(Tip:We will be based on your guests in your country to send the corresponding adapter plug) ➷Wholesale retailers are welcome to negotiate long-term business with us! __________________❀Product Information❀__________________ Feature: -Support for MPM2 of NVME agreement such for Samsung PM961, for 960EVO, for SM961, for PM951, for sm951, for INTEL 600P, for Lite T10. SATA protocol M.2 is not supported. -PCIE NVME m.2 M Key type M.2 SSD to PCIE 4X 8X 16X. -SSD M.2 of PCI-E signal is generally KEY-M. -Support equipment: various PCIE protocol NVME m.2 SSD solid state drives. -Support for windows8 / 10 / for Linux system. Specification: Item Type: Adapter Card Expansion Card Adapter Card: M.2 M Key type M.2 solid state drive SSD to PCIE 3.0 16X adapter card PCI E 3.0 4x 2230-2280 M.2 full speed Input Interface: Support M-Key M.2 NVME (does not support SATA protocol M.2 NGFF) Output Interface: PCIE 4X 8X 16X Support Slot: PCIE 4X 8X 16X Support Equipment: Various PCIE protocol NVME m.2 SSD solid state drives Support System: for windows 8 / 10 / for Linux Package List: 1 x Adapter Card 1 x Foam

Features: 1.M key M.2 NGFF SSD to PCIe X4 adapter. 2.The speed and other properties is not changed,only form conversion interface. 3.Support Type 2230/2242/2260/2280 type M.2 Card dimension. 4.Transparent to the operating system and does not require any software drivers. System requirement: Motherboard: Z97 or later, Windows 10 or later Note: The SSD of the PCI-E NGFF NVME (M.2 M KEY SSD) interface is identified by the computer's PCI-E X4 or X8 or X16 interface (that is, the PCI-E graphics interface).Be sure to check if your computer has this interface before you buy it. If you don't have it, you can't use it. If your motherboard chipset is below 9 series, do not use PCIE X4 hard drives such as pm951, sm951, pm950! After the SSD of the PCI-E NGFF interface is transferred through the PCI-EX4 or X8 or X16 interface of the computer, entering the operating system can be correctly identified, ordinary computers can not be seen under the BIOS,Therefore, system startup is not supported unless your computer motherboard BIOS supports PCI-E device booting! Include:1x adapter riser card conv

Welcome to MissCherry store, have a good shopping! Features: -M key M.2 NGFF SSD to PCIe X4 adapter. -The speed and other properties is not changed,only form conversion interface. -Support Type 2230/2242/2260/2280 type M.2 Card dimension. -Transparent to the operating system and does not require any software drivers. System requirement: Motherboard: Z97 or later, Windows 10 or later Note: The SSD of the PCI-E NGFF NVME (M.2 M KEY SSD) interface is identified by the computer's PCI-E X4 or X8 or X16 interface (that is, the PCI-E graphics interface).Be sure to check if your computer has this interface before you buy it. If you don't have it, you can't use it. If your motherboard chipset is below 9 series, do not use PCIE X4 hard drives such as pm951, sm951, pm950! After the SSD of the PCI-E NGFF interface is transferred through the PCI-EX4 or X8 or X16 interface of the computer, entering the operating system can be correctly identified, ordinary computers can not be seen under the BIOS,Therefore, system startup is not supported unless your computer motherboard BIOS supports PCI-E device booting! Include:1x adapter riser card converter Welcome to MissCherry!!! : If there are any problems, please contact us first, do not give bad comments, thank you for your cooperation, we will serve you sincerely ask you to make a pleasant shopping! 【Working Hours】: Mon - Sat (9:00-18:00) As we are overseas sellers, consult the relevant issues, please try English. Thank

1. Wire advantages: high frequency support PCIe 3.0 X16 8G/bps stable transfer. 2.Cable length:25cm, our wire has a low impedance, 25cm cable can be stable at PCIe3.0 full speed reading and writing. 3.Differential signal without hole design, there is no problem of signal attenuation interference in a parasitic capacitance and parasitic inductance, there will be no more CAF Mini short circuit, cable is durability. 4.PCB use high frequency low resistance of materials with high quality, PCB using high TG board, copper thickness thicken to 1oz, gold finger plating enough gold, Good conductive performance, can reduce oxidize higher impedance caused by the crash blue screen. 5.Suitable graphics card: for GTX1080ti High-end graphics CARDS, fireprow7100, radeon RX580, VEGA64, prowx5100, quadroK1200 professional graphics card, support for all the PCIe CARDS after 2015 years.Note: This product does not support external notebook graphics!Our all cables doesn't support the machine with 2x CPUs. Colour:black Material:PCB Size:Length: 25cm Package Contents: 1 * Extension CableOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

1. Wire advantages: high frequency support PCIe 3.0 X16 8G/bps stable transfer. 2.Cable length:25cm, our wire has a low impedance, 25cm cable can be stable at PCIe3.0 full speed reading and writing. 3.Differential signal without hole design, there is no problem of signal attenuation interference in a parasitic capacitance and parasitic inductance, there will be no more CAF Mini short circuit, cable is durability. 4.PCB use high frequency low resistance of materials with high quality, PCB using high TG board, copper thickness thicken to 1oz, gold finger plating enough gold, Good conductive performance, can reduce oxidize higher impedance caused by the crash blue screen. 5.Suitable graphics card: for GTX1080ti High-end graphics CARDS, fireprow7100, radeon RX580, VEGA64, prowx5100, quadroK1200 professional graphics card, support for all the PCIe CARDS after 2015 years.Note: This product does not support external notebook graphics!Our all cables doesn't support the machine with 2x CPUs. Colour:black Material:PCB Size:Length: 25cm Package Contents: 1 * Extension CableOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

________♤ Welcome home ♤___________ ☛Welcome to our store, we insist on to sell the best quality items. ☆Understand the store dynamic order more favorable ~ ☆What are you waiting for? Go ahead. Feature: -Support for MPM2 of NVME agreement such for Samsung PM961, for 960EVO, for SM961, for PM951, for sm951, for INTEL 600P, for Lite T10. SATA protocol M.2 is not supported. -PCIE NVME m.2 M Key type M.2 SSD to PCIE 4X 8X 16X. -SSD M.2 of PCI-E signal is generally KEY-M. -Support equipment: various PCIE protocol NVME m.2 SSD solid state drives. -Support for windows8 / 10 / for Linux system. Specification: Item Type: Adapter Card Expansion Card Adapter Card: M.2 M Key type M.2 solid state drive SSD to PCIE 3.0 16X adapter card PCI E 3.0 4x 2230-2280 M.2 full speed Input Interface: Support M-Key M.2 NVME (does not support SATA protocol M.2 NGFF) Output Interface: PCIE 4X 8X 16X Support Slot: PCIE 4X 8X 16X Support Equipment: Various PCIE protocol NVME m.2 SSD solid state drives Support System: for windows 8 / 10 / for Linux Package List: 1 x Adapter Card 1 x Foam

PCI-e 4x/8x/16x to M2 NVMe SSD Card allows adding nvme SSD to your PC at perfect performance Compatible with M.2 SSDs (NVMe): 80x22mm, 60x22mm and 42x22mm. Such as PM961, 961EVO This M2 SSD adapter can Only Support M.2 PCI-e Based M Key Nvme SSD. DO NOT support PCI-e M Key AHCI SSD, SATA based B+M key or B Key SSD. Silicone thermal pad, it can realize the full potential of Heat Dissipation,Ensure a long lasting fast transfer. 1,High-Speed transfer 2,Shell groove design 3,Heat sink,Thermal pad 4,Supports PCIE M.2 SSD (NVMe or AHCI, Key-M), PCIE 3.0 X4 32 Gbps bandwidth Not supported SATA-based M.2 SSD Apply to 2280/2260/2242 / 2230mm M.2 SSD Support TRIM and UASP PCIE X16 lane installation Supports PCIe 1.0, PCIe 2.0 and PCIe 3.1 motherard Compatible with Windows/MAC/Linux, no driver required Colour: Black Material: PC board + metal Package Contents: 1* M2 NVME Adapter 1* silicone pad 1* ScrewdriverOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Hello.this is newchitengye store,welcome! Features: 1.M key M.2 NGFF SSD to PCIe X4 adapter. 2.The speed and other properties is not changed,only form conversion interface. 3.Support Type 2230/2242/2260/2280 type M.2 Card dimension. 4.Transparent to the operating system and does not require any software drivers. System requirement: Motherboard: Z97 or later, Windows 10 or later Note: The SSD of the PCI-E NGFF NVME (M.2 M KEY SSD) interface is identified by the computer's PCI-E X4 or X8 or X16 interface (that is, the PCI-E graphics interface).Be sure to check if your computer has this interface before you buy it. If you don't have it, you can't use it. If your motherboard chipset is below 9 series, do not use PCIE X4 hard drives such as pm951, sm951, pm950! After the SSD of the PCI-E NGFF interface is transferred through the PCI-EX4 or X8 or X16 interface of the computer, entering the operating system can be correctly identified, ordinary computers can not be seen under the BIOS,Therefore, system startup is not supported unless your computer motherboard BIOS supports PCI-E device booting! Include:1x adapter riser card converter Have a nice

Welcome to Purelove store, have a good shopping! Features: -M key M.2 NGFF SSD to PCIe X4 adapter. -The speed and other properties is not changed,only form conversion interface. -Support Type 2230/2242/2260/2280 type M.2 Card dimension. -Transparent to the operating system and does not require any software drivers. System requirement: Motherboard: Z97 or later, Windows 10 or later Note: The SSD of the PCI-E NGFF NVME (M.2 M KEY SSD) interface is identified by the computer's PCI-E X4 or X8 or X16 interface (that is, the PCI-E graphics interface).Be sure to check if your computer has this interface before you buy it. If you don't have it, you can't use it. If your motherboard chipset is below 9 series, do not use PCIE X4 hard drives such as pm951, sm951, pm950! After the SSD of the PCI-E NGFF interface is transferred through the PCI-EX4 or X8 or X16 interface of the computer, entering the operating system can be correctly identified, ordinary computers can not be seen under the BIOS,Therefore, system startup is not supported unless your computer motherboard BIOS supports PCI-E device booting! Include:1x adapter riser card converter Welcome to “Purelove” store! We provide the products with the high quality and competitive price.we will update product listing timely and promise all products are 100% new. For more promotion,please follow us,get more discount at first

Input interface: M-Key M.2 NVME(Don't Support SATA Protocol m.2 NGFF). Output interface: PCIE X16. The installation is easy and does not require any driver software programs. The PCI-E NGFF NVME (M.2 M KEY SSD) interface SSD is recognized by the computer's PCI-EX4 or X8 or X16 interface (that is, the PCI-E image interface). Please make sure that your machine has it before purchasing. This interface cannot be used without it. Note: If your motherboard chipset is below 9 series, do not use PCIE X4 hard drives such as pm951, sm951, pm950, etc.! For AMD chipset motherboards are not recommended to buy! Port: PCI-E 4X Data transmission speed: 6000MB/s Expansion interface: M-KEY M.2 Suitable port: PCI-E 4x.PCI-E 8x.PCI-E16x Power supply e: PCIE Supports M.2 card size: 2230,2242,2260,2280 colour:Black Material:PCB board + metal Package Contents: 1 x Adapter CardOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

1. Wire advantages: high frequency support PCIe 3.0 X16 8G/bps stable transfer. 2.Cable length:25cm, our wire has a low impedance, 25cm cable can be stable at PCIe3.0 full speed reading and writing. 3.Differential signal without hole design, there is no problem of signal attenuation interference in a parasitic capacitance and parasitic inductance, there will be no more CAF Mini short circuit, cable is durability. 4.PCB use high frequency low resistance of materials with high quality, PCB using high TG board, copper thickness thicken to 1oz, gold finger plating enough gold, Good conductive performance, can reduce oxidize higher impedance caused by the crash blue screen. 5.Suitable graphics card: for GTX1080ti High-end graphics CARDS, fireprow7100, radeon RX580, VEGA64, prowx5100, quadroK1200 professional graphics card, support for all the PCIe CARDS after 2015 years.Note: This product does not support external notebook graphics!Our all cables doesn't support the machine with 2x CPUs. Colour:black Material:PCB Size:Length: 25cm Package Contents: 1 * Extension CableOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

_____________♥♥♥♥♥♥CONCON♥♥♥♥♥♥_____________ ━(*`∀ ́*)ノ!Welcome to our store, sell the best quality items. ✔Ready Stock ✔Fast Shipments✔ Lowest price ✔Quality Checked✔Brand new 100% ★★Tip★★ ✌We will be based on your guests in your country to send the corresponding adapter plug. _______________❀Product Information❀______________ Feature: -Support for MPM2 of NVME agreement such for Samsung PM961, for 960EVO, for SM961, for PM951, for sm951, for INTEL 600P, for Lite T10. SATA protocol M.2 is not supported. -PCIE NVME m.2 M Key type M.2 SSD to PCIE 4X 8X 16X. -SSD M.2 of PCI-E signal is generally KEY-M. -Support equipment: various PCIE protocol NVME m.2 SSD solid state drives. -Support for windows8 / 10 / for Linux system. Specification: Item Type: Adapter Card Expansion Card Adapter Card: M.2 M Key type M.2 solid state drive SSD to PCIE 3.0 16X adapter card PCI E 3.0 4x 2230-2280 M.2 full speed Input Interface: Support M-Key M.2 NVME (does not support SATA protocol M.2 NGFF) Output Interface: PCIE 4X 8X 16X Support Slot: PCIE 4X 8X 16X Support Equipment: Various PCIE protocol NVME m.2 SSD solid state drives Support System: for windows 8 / 10 / for Linux Package List: 1 x Adapter Card 1 x Foam

PCI-e 4x/8x/16x to M2 NVMe SSD Card allows adding nvme SSD to your PC at perfect performance Compatible with M.2 SSDs (NVMe): 80x22mm, 60x22mm and 42x22mm. Such as PM961, 961EVO This M2 SSD adapter can Only Support M.2 PCI-e Based M Key Nvme SSD. DO NOT support PCI-e M Key AHCI SSD, SATA based B+M key or B Key SSD. Silicone thermal pad, it can realize the full potential of Heat Dissipation,Ensure a long lasting fast transfer. 1,High-Speed transfer 2,Shell groove design 3,Heat sink,Thermal pad 4,Supports PCIE M.2 SSD (NVMe or AHCI, Key-M), PCIE 3.0 X4 32 Gbps bandwidth Not supported SATA-based M.2 SSD Apply to 2280/2260/2242 / 2230mm M.2 SSD Support TRIM and UASP PCIE X16 lane installation Supports PCIe 1.0, PCIe 2.0 and PCIe 3.1 motherard Compatible with Windows/MAC/Linux, no driver required Colour: Black Material: PC board + metal Package Contents: 1* M2 NVME Adapter 1* silicone pad 1* ScrewdriverOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

Features: 1.M key M.2 NGFF SSD to PCIe X4 adapter. 2.The speed and other properties is not changed,only form conversion interface. 3.Support Type 2230/2242/2260/2280 type M.2 Card dimension. 4.Transparent to the operating system and does not require any software drivers. System requirement: Motherboard: Z97 or later, Windows 10 or later Note: The SSD of the PCI-E NGFF NVME (M.2 M KEY SSD) interface is identified by the computer's PCI-E X4 or X8 or X16 interface (that is, the PCI-E graphics interface).Be sure to check if your computer has this interface before you buy it. If you don't have it, you can't use it. If your motherboard chipset is below 9 series, do not use PCIE X4 hard drives such as pm951, sm951, pm950! After the SSD of the PCI-E NGFF interface is transferred through the PCI-EX4 or X8 or X16 interface of the computer, entering the operating system can be correctly identified, ordinary computers can not be seen under the BIOS,Therefore, system startup is not supported unless your computer motherboard BIOS supports PCI-E device booting! Include:1x adapter riser card conv

___________________❀Alwaysonline❀___________________ Welcome to our store, we insist on the lowest price to sell the best quality items. ✔Ready Stock ✔Quality Checked ★Surprises for you★ ☞Shop Voucher: Get More Discount ★★Attention Please★★ ✌We will be based on your guests in your country to send the corresponding adapter plug. _______________❀Product Information❀______________ Feature: -Support for MPM2 of NVME agreement such for Samsung PM961, for 960EVO, for SM961, for PM951, for sm951, for INTEL 600P, for Lite T10. SATA protocol M.2 is not supported. -PCIE NVME m.2 M Key type M.2 SSD to PCIE 4X 8X 16X. -SSD M.2 of PCI-E signal is generally KEY-M. -Support equipment: various PCIE protocol NVME m.2 SSD solid state drives. -Support for windows8 / 10 / for Linux system. Specification: Item Type: Adapter Card Expansion Card Adapter Card: M.2 M Key type M.2 solid state drive SSD to PCIE 3.0 16X adapter card PCI E 3.0 4x 2230-2280 M.2 full speed Input Interface: Support M-Key M.2 NVME (does not support SATA protocol M.2 NGFF) Output Interface: PCIE 4X 8X 16X Support Slot: PCIE 4X 8X 16X Support Equipment: Various PCIE protocol NVME m.2 SSD solid state drives Support System: for windows 8 / 10 / for Linux Package List: 1 x Adapter Card 1 x Foam

_____________♥♥♥♥♥♥CONCON♥♥♥♥♥♥_____________ ━(*｀∀´*)ノ亻!Welcome to our store, sell the best quality items. ✔Ready Stock ✔Fast Shipments✔ Lowest price ✔Quality Checked✔Brand new 100% ★If you need a free gift, please leave a message on the order (please attach a screenshot of the shop you follow). ★★Tip★★ ✌We will be based on your guests in your country to send the corresponding adapter plug. _______________❀Product Information❀______________ Feature: 1. Support for MPM2 of NVME agreement such for Samsung PM961, for 960EVO, for SM961, for PM951, for sm951, for INTEL 600P, for Lite T10. SATA protocol M.2 is not supported. 2. PCIE NVME m.2 M Key type M.2 SSD to PCIE 4X 8X 16X. 3. SSD M.2 of PCI-E signal is generally KEY-M. 4. Support equipment: various PCIE protocol NVME m.2 SSD solid state drives. 5. Support for windows8 / 10 / for Linux system. Specification: Item Type: Adapter Card Expansion Card Adapter Card: M.2 M Key type M.2 solid state drive SSD to PCIE 3.0 16X adapter card PCI E 3.0 4x 2230-2280 M.2 full speed Input Interface: Support M-Key M.2 NVME (does not support SATA protocol M.2 NGFF) Output Interface: PCIE 4X 8X 16X Support Slot: PCIE 4X 8X 16X Support Equipment: Various PCIE protocol NVME m.2 SSD solid state drives Support System: for windows 8 / 10 / for Linux Package List: 1 x Adapter Card 1 x Foam St

PCI-e 4x/8x/16x to M2 NVMe SSD Card allows adding nvme SSD to your PC at perfect performance Compatible with M.2 SSDs (NVMe): 80x22mm, 60x22mm and 42x22mm. Such as PM961, 961EVO This M2 SSD adapter can Only Support M.2 PCI-e Based M Key Nvme SSD. DO NOT support PCI-e M Key AHCI SSD, SATA based B+M key or B Key SSD. Silicone thermal pad, it can realize the full potential of Heat Dissipation,Ensure a long lasting fast transfer. 1,High-Speed transfer 2,Shell groove design 3,Heat sink,Thermal pad 4,Supports PCIE M.2 SSD (NVMe or AHCI, Key-M), PCIE 3.0 X4 32 Gbps bandwidth Not supported SATA-based M.2 SSD Apply to 2280/2260/2242 / 2230mm M.2 SSD Support TRIM and UASP PCIE X16 lane installation Supports PCIe 1.0, PCIe 2.0 and PCIe 3.1 motherard Compatible with Windows/MAC/Linux, no driver required Colour: Black Material: PC board + metal Package Contents: 1* M2 NVME Adapter 1* silicone pad 1* ScrewdriverOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1

PCI-e 4x/8x/16x to M2 NVMe SSD Card allows adding nvme SSD to your PC at perfect performance Compatible with M.2 SSDs (NVMe): 80x22mm, 60x22mm and 42x22mm. Such as PM961, 961EVO This M2 SSD adapter can Only Support M.2 PCI-e Based M Key Nvme SSD. DO NOT support PCI-e M Key AHCI SSD, SATA based B+M key or B Key SSD. Silicone thermal pad, it can realize the full potential of Heat Dissipation,Ensure a long lasting fast transfer. 1,High-Speed transfer 2,Shell groove design 3,Heat sink,Thermal pad 4,Supports PCIE M.2 SSD (NVMe or AHCI, Key-M), PCIE 3.0 X4 32 Gbps bandwidth Not supported SATA-based M.2 SSD Apply to 2280/2260/2242 / 2230mm M.2 SSD Support TRIM and UASP PCIE X16 lane installation Supports PCIe 1.0, PCIe 2.0 and PCIe 3.1 motherard Compatible with Windows/MAC/Linux, no driver required Colour: Black Material: PC board + metal Package Contents: 1* M2 NVME Adapter 1* silicone pad 1* ScrewdriverOnly the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1